{
 "slug": "hp-chromebook-14-g4-display-assembly-replacement-p35",
 "title": "How to do an HP Chromebook 14 G4 display assembly replacement",
 "model": "hp-chromebook-14-g4",
 "model_name": "HP Chromebook 14 G4",
 "component": "display assembly",
 "manufacturer": "HP",
 "url": "https://laptoppartfinder.com/guides/hp-chromebook-14-g4-display-assembly-replacement-p35/",
 "api_url": "https://laptoppartfinder.com/api/guides/hp-chromebook-14-g4-display-assembly-replacement-p35",
 "source_url": "https://h10032.www1.hp.com/ctg/Manual/c04823664.pdf",
 "source_title": "HP Maintenance and Service Guide",
 "pages": "printed pages 35–41",
 "service_classification": null,
 "bench_tested": false,
 "markdown": "# HP Chromebook 14 G4 display assembly replacement\n\nSource: https://h10032.www1.hp.com/ctg/Manual/c04823664.pdf (printed pages 35–41). OEM-documented procedure; not bench-tested.\n\nHP Chromebook 14 G4 display assembly replacement. HP prints this procedure on printed page 35 of its maintenance and service guide.\n\n## tools and parts\n\n- Flat-bladed screw driver, Magnetic screw driver and Phillips P0 screw driver\n- Static-safe work surface\n- No spare part number for this component was found in the cached manual\n\n## preparation\n\nHP prints its tools list and its handling and electrostatic-discharge cautions on printed page 18. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.\n\n## replacement\n\n1. Let go of ZIF connector to which display panel cable is attached, and then disconnect display panel cable from the system board. (printed page 35).\n2. Detach wireless antenna cables from WLAN terminals on system board and WLAN terminals on WLAN module. (printed page 35).\n3. Take out the two Phillips 2.0×4.0 screws that hold the display assembly to the base enclosure. (printed page 35).\n4. Take out the display assembly (4). (printed page 35).\n5. If it is necessary to replace display enclosure or any of the panel assembly subcomponents: a. Take out the two display bezel screw covers (1). b. Take out the two Phillips PM2.0×2.0 broad head screws that hold the display enclosure to the display panel assembly. (printed page 35).\n6. If it is necessary to replace webcam/microphone module: a. Detach webcam/microphone module from the display enclosure. (printed page 36).\n7. If it is necessary to replace display panel: a. Take out the four Phillips PM2.0×3.0 screws that hold the display panel to the display enclosure. (printed page 37).\n8. If it is necessary to replace display hinges: (printed page 38).\n9. If it is necessary to replace display panel cable: a. Detach display panel cable from webcam/microphone module. b. Release display panel cable from retention clips and channel built into top, left, and bottom edges of display enclosure. (printed page 39).\n10. If it is necessary to replace antenna cable: a. Peel to remove transceivers from top of display enclosure (1). b. Release cable from the retention clips and channel built into the side of the panel enclosure. (printed page 40).\n11. Put the display assembly back by repeating the printed removal moves in the opposite order (printed page 41).\n",
 "outcome": "found",
 "data_revision": "93b6f8041cad",
 "license": "Free to use with attribution: credit \"Laptop Part Finder\" and link to https://laptoppartfinder.com (or the page you used). Please do not republish or mirror the dataset in bulk without permission.",
 "attribution": "Laptop Part Finder (https://laptoppartfinder.com)",
 "terms_url": "https://laptoppartfinder.com/terms/#data-license"
}