{
 "slug": "hp-elite-c640-14-inch-g3-chromebook-bottom-cover-replacement-p28",
 "title": "How to do an HP Elite c640 14 inch G3 Chromebook bottom cover replacement",
 "model": "hp-elite-c640-14-g3-chromebook",
 "model_name": "HP Elite c640 14 inch G3 Chromebook",
 "component": "bottom cover",
 "manufacturer": "HP",
 "url": "https://laptoppartfinder.com/guides/hp-elite-c640-14-inch-g3-chromebook-bottom-cover-replacement-p28/",
 "api_url": "https://laptoppartfinder.com/api/guides/hp-elite-c640-14-inch-g3-chromebook-bottom-cover-replacement-p28",
 "source_url": "https://kaas.hpcloud.hp.com/pdf-public/pdf_6048310_en-US-1.pdf",
 "source_title": "HP Maintenance and Service Guide",
 "pages": "printed pages 29–30",
 "service_classification": null,
 "bench_tested": false,
 "markdown": "# HP Elite c640 14 inch G3 Chromebook bottom cover replacement\n\nSource: https://kaas.hpcloud.hp.com/pdf-public/pdf_6048310_en-US-1.pdf (printed pages 29–30). OEM-documented procedure; not bench-tested.\n\nHP Elite c640 14 inch G3 Chromebook™ bottom cover replacement. HP prints this procedure on printed page 28 of its maintenance and service guide, and the spare-part table for this part is on printed page 28.\n\n## tools and parts\n\n- Screwdrivers and a non-marking pry tool as HP lists for this procedure\n- Static-safe work surface\n- `N12890-001` - Bottom cover for use in models with WWAN. Source: printed page 28.\n- `N12891-001` - Bottom cover for use in models with WLAN. Source: printed page 28.\n\n## preparation\n\nSave your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.\n\n## replacement\n\n1. Take the four Phillips M2.5 × 6.0 fasteners (1) out of the top and the two Phillips M2.0 × 4.0 fasteners (2) from the bottom of the bottom cover. (printed page 29).\n2. Open the screen to 90° (1). (printed page 29).\n3. While holding the bottom edge of the machine, place your thumbs at the upper cover, below the keyboard as well as to the left as well as right of the touchpad (2), and after that push and pull up to free the bottom cover. (printed page 29).\n4. Close the machine and place it upside down (3). (printed page 29).\n5. Pull the bottom cover off the machine by drawing up at the seam between the hinges (4). (printed page 29).\n6. When replacing the lower cover, make sure the gold metal strip (1) as well as silver rectangular foil (2) are installed and intact. (printed page 30).\n\n",
 "outcome": "found",
 "data_revision": "93b6f8041cad",
 "license": "Free to use with attribution: credit \"Laptop Part Finder\" and link to https://laptoppartfinder.com (or the page you used). Please do not republish or mirror the dataset in bulk without permission.",
 "attribution": "Laptop Part Finder (https://laptoppartfinder.com)",
 "terms_url": "https://laptoppartfinder.com/terms/#data-license"
}