{
 "slug": "hp-elitebook-1040-14-inch-g11-notebook-display-assembly-replacement-p60",
 "title": "How to do an HP EliteBook 1040 G11 display assembly replacement",
 "model": "hp-elitebook-1040-g11",
 "model_name": "HP EliteBook 1040 G11",
 "component": "display assembly",
 "manufacturer": "HP",
 "url": "https://laptoppartfinder.com/guides/hp-elitebook-1040-14-inch-g11-notebook-display-assembly-replacement-p60/",
 "api_url": "https://laptoppartfinder.com/api/guides/hp-elitebook-1040-14-inch-g11-notebook-display-assembly-replacement-p60",
 "source_url": "https://kaas.hpcloud.hp.com/pdf-public/pdf_10314105_en-US-1.pdf",
 "source_title": "HP Maintenance and Service Guide",
 "pages": "printed pages 60–62",
 "service_classification": null,
 "bench_tested": false,
 "markdown": "# HP EliteBook 1040 G11 display assembly replacement\n\nSource: https://kaas.hpcloud.hp.com/pdf-public/pdf_10314105_en-US-1.pdf (printed pages 60–62). OEM-documented procedure; not bench-tested.\n\nHP Elitebook 1040 14 inch G11 Notebook display assembly replacement. HP prints this procedure on printed page 60 of its maintenance and service guide.\n\n## Tools and parts\n\n- Screwdrivers and a non-marking pry tool as HP lists for this procedure\n- Static-safe work surface\n- `N98107-001` - 35.6 cm (14.0 in), brightview, UWVA, OLED + LBL, nTOP, with infrared webcam, for use on computer models equipped with WLAN; typical brightness: 400 nits. Source: printed page 60.\n- `P04250-001` - 35.6 cm (14.0 in), antiglare, WUXGA, TOP, with privacy filter and infrared webcam, for use on computer models equipped with WWAN; typical brightness: 800 nits. Source: printed page 60.\n- `N98103-001` - 35.6 cm (14.0 in), antiglare, WUXGA, TOP, with TOF infrared webcam, for use on computer models equipped with WWAN; typical brightness: 400 nits. Source: printed page 60.\n- `N98102-001` - 35.6 cm (14.0 in), antiglare, WUXGA, TOP, with TOF infrared webcam, for use on computer models equipped with WLAN; typical brightness: 400 nits. Source: printed page 60.\n- `N98106-001` - 35.6 cm (14.0 in), antiglare, WUXGA, nTOP, WLED + LBL, with infrared webcam, for use on computer models equipped with WWAN; typical brightness: 400 nits. Source: printed page 60.\n- `N98105-001` - 35.6 cm (14.0 in), antiglare, WUXGA, nTOP, WLED + LBL, with infrared webcam, for use on computer models equipped with WLAN; typical brightness: 400 nits. Source: printed page 60.\n- `N98104-001` - 35.6 cm (14.0 in), antiglare, WUXGA, nTOP, with privacy filter and infrared webcam, for use on computer models equipped with WWAN; typical brightness: 1000 nits. Source: printed page 60.\n- `N98503-001` - 35.6 cm (14.0 in), antiglare, WUXGA, nTOP, with infrared webcam, for use on computer models equipped with WWAN; typical brightness: 800 nits. Source: printed page 60.\n\n## Preparation\n\nSave your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.\n\n## Replacement\n\n1. Detach the display hub cable from the system board. (printed page 60).\n2. Gently detach the two WWAN antenna cables from the terminals on the WWAN module. (printed page 60).\n3. Let go of the WWAN antenna cables from the retention clips and routing channels that are built (printed page 61).\n4. Detach the display panel cable from the system board. (printed page 61).\n5. Gently detach the two WLAN antenna cables from the terminals on the WLAN module. (printed page 61).\n6. Let go of the WLAN antenna cables from the retention clips and routing channels that are built (printed page 61).\n7. Take out the six Phillips M2.5 × 4.1 screws that hold the display assembly to the computer. (printed page 62).\n8. Swing the top edge of the display assembly down and away from the top panel with keyboard (printed page 62).\n9. Let go of the display hinges from the top panel by sliding the top cover with keyboard away from (printed page 62).\n10. Separate the top cover with keyboard from the display assembly. (printed page 62).\n",
 "outcome": "found",
 "data_revision": "93b6f8041cad",
 "license": "Free to use with attribution: credit \"Laptop Part Finder\" and link to https://laptoppartfinder.com (or the page you used). Please do not republish or mirror the dataset in bulk without permission.",
 "attribution": "Laptop Part Finder (https://laptoppartfinder.com)",
 "terms_url": "https://laptoppartfinder.com/terms/#data-license"
}