{
 "slug": "hp-elitebook-1040-14-inch-g11-notebook-touchpad-replacement-p65",
 "title": "How to do an HP EliteBook 1040 G11 touchpad replacement",
 "model": "hp-elitebook-1040-g11",
 "model_name": "HP EliteBook 1040 G11",
 "component": "touchpad",
 "manufacturer": "HP",
 "url": "https://laptoppartfinder.com/guides/hp-elitebook-1040-14-inch-g11-notebook-touchpad-replacement-p65/",
 "api_url": "https://laptoppartfinder.com/api/guides/hp-elitebook-1040-14-inch-g11-notebook-touchpad-replacement-p65",
 "source_url": "https://kaas.hpcloud.hp.com/pdf-public/pdf_10314105_en-US-1.pdf",
 "source_title": "HP Maintenance and Service Guide",
 "pages": "printed pages 46–67",
 "service_classification": null,
 "bench_tested": false,
 "markdown": "# HP EliteBook 1040 G11 touchpad replacement\n\nSource: https://kaas.hpcloud.hp.com/pdf-public/pdf_10314105_en-US-1.pdf (printed pages 46–67). OEM-documented procedure; not bench-tested.\n\nHP Elitebook 1040 14 inch G11 Notebook touchpad replacement. HP prints this procedure on printed page 65 of its maintenance and service guide.\n\n## tools and parts\n\n- Screwdrivers and a non-marking pry tool as HP lists for this procedure\n- Static-safe work surface\n- `N98120-001` - For use on computer models equipped with NFC (includes NFC module antenna and cable). Source: printed page 66.\n- `N98119-001` - For use on computer models not equipped with NFC. Source: printed page 66.\n\n## preparation\n\nSave your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.\n\n1. Get the computer ready for disassembly (see that procedure on page 44). (printed page 46).\n2. Take off the bottom cover (see that procedure on page 44). (printed page 46).\n3. Lift the battery out of the computer (see that procedure on page 45). (printed page 63).\n\n## replacement\n\n4. Let go of the ZIF connector the NFC module antenna cable is connected to (printed page 66).\n5. Take out the three Phillips M2.0 × 2.4 broadhead screws that hold the touchpad to the (printed page 66).\n6. Lift the rear edge of the touch pad until it rests at an angle. (printed page 66).\n7. Take out the touchpad by sliding it up and back at an part. (printed page 67).\n\n",
 "outcome": "found",
 "data_revision": "93b6f8041cad",
 "license": "Free to use with attribution: credit \"Laptop Part Finder\" and link to https://laptoppartfinder.com (or the page you used). Please do not republish or mirror the dataset in bulk without permission.",
 "attribution": "Laptop Part Finder (https://laptoppartfinder.com)",
 "terms_url": "https://laptoppartfinder.com/terms/#data-license"
}