{
 "slug": "hp-elitebook-1040-14-inch-g9-display-assembly-replacement-p60",
 "title": "How to do an HP EliteBook 1040 G9 display assembly replacement",
 "model": "hp-elitebook-1040-g9",
 "model_name": "HP EliteBook 1040 G9",
 "component": "display assembly",
 "manufacturer": "HP",
 "url": "https://laptoppartfinder.com/guides/hp-elitebook-1040-14-inch-g9-display-assembly-replacement-p60/",
 "api_url": "https://laptoppartfinder.com/api/guides/hp-elitebook-1040-14-inch-g9-display-assembly-replacement-p60",
 "source_url": "https://kaas.hpcloud.hp.com/pdf-public/pdf_5664355_en-US-1.pdf",
 "source_title": "HP Maintenance and Service Guide",
 "pages": "printed pages 60–62",
 "service_classification": null,
 "bench_tested": false,
 "markdown": "# HP EliteBook 1040 G9 display assembly replacement\n\nSource: https://kaas.hpcloud.hp.com/pdf-public/pdf_5664355_en-US-1.pdf (printed pages 60–62). OEM-documented procedure; not bench-tested.\n\nHP EliteBook 1040 14 inch G9 Notebook PC display assembly replacement. HP prints this procedure on printed page 60 of its maintenance and service guide.\n\n## Tools and parts\n\n- Screwdrivers and a non-marking pry tool as HP lists for this procedure\n- Static-safe work surface\n- `N15078-001` - 35.6 cm (14.0 in), LCD, WUXGA (1920 × 1200), antiglare, UWVA, WLED + LBL, non-TOP bent display assembly for use with computer models with WWAN capability; typical brightness: 1000 nits (includes WWAN antenna cables). Source: printed page 59.\n- `N12878-001` - 35.6 cm (14.0 in), LCD, WUXGA (1920 × 1200), antiglare, UWVA, WLED + LBL, non-TOP bent display panel equipped with 5 MP infrared time-of-flight (ToF) camera; typical brightness: 1000 nits. Source: printed page 59.\n- `N15079-001` - 35.6 cm (14.0 in), LCD, WUXGA (1920 × 1200), antiglare, UWVA, WLED + LBL, non-TOP bent display panel for use with computer models with WWAN capability; typical brightness: 400 nits (includes WWAN antenna cables). Source: printed page 59.\n- `N12879-001` - 35.6 cm (14.0 in), LCD, WUXGA (1920 × 1200), antiglare, UWVA, WLED + LBL, non-TOP bent display panel equipped with 5 MP infrared ToF camera; typical brightness: 400 nits. Source: printed page 59.\n- `N12876-001` - 35.6 cm (14.0 in), LCD, WUXGA (1920 × 1200), antiglare, UWVA, LED, TOP bent display panel equipped with 5 MP infrared ToF camera for use with computer models with WWAN capability; typical brightness: 250 nits (includes WWAN antenna cables). Source: printed page 59.\n- `N12877-001` - 35.6 cm (14.0 in), LCD, WUXGA (1920 × 1200), antiglare, UWVA, LED, TOP bent display panel equipped with 5 MP infrared ToF camera; typical brightness: 250 nits. Source: printed page 59.\n- `N12875-001` - 35.6 cm (14.0 in), LCD, WUXGA (1920 × 1200), antiglare, UWVA, LED, non-TOP bent display panel equipped with 5 MP infrared ToF camera for use with computer models with WWAN capability; typical brightness: 250 nits (includes WWAN antenna cables). Source: printed page 59.\n- `N12874-001` - 35.6 cm (14.0 in), LCD, WUXGA (1920 × 1200), antiglare, UWVA, LED, non-TOP bent display panel equipped with 5 MP infrared ToF camera; typical brightness: 250 nits. Source: printed page 59.\n\n## Preparation\n\nSave your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.\n\n## Replacement\n\n1. Detach the webcam lead (1) from the main board. (printed page 60).\n2. Gently detach the WWAN module aerial leads (2) from the WWAN module. (printed page 60).\n3. Free the webcam lead and WWAN module aerial leads from the clips (3) that are built into the fan. (printed page 60).\n4. Detach the screen panel lead (1) from the main board. (printed page 60).\n5. Gently detach the WLAN module aerial leads from the WLAN module (2). (printed page 60).\n6. Free the screen panel lead from the clips (3) that are built into the machine. (printed page 60).\n7. Free the WLAN module aerial leads from the clips (4) that are built into the machine. (printed page 61).\n8. Take the six Phillips M2.5 × 4.9 fasteners that hold the screen assembly to the machine. (printed page 61).\n9. Swing the screen hinges (1) upward and back as far as they will go. (printed page 61).\n10. Open the screen assembly (2) as far as it will open. (printed page 61).\n11. Split the machine (3) from the screen assembly. (printed page 62).\n12. Fit the replacement part by working back through the printed removal steps (printed page 62).\n",
 "outcome": "found",
 "data_revision": "93b6f8041cad",
 "license": "Free to use with attribution: credit \"Laptop Part Finder\" and link to https://laptoppartfinder.com (or the page you used). Please do not republish or mirror the dataset in bulk without permission.",
 "attribution": "Laptop Part Finder (https://laptoppartfinder.com)",
 "terms_url": "https://laptoppartfinder.com/terms/#data-license"
}