{
 "slug": "hp-elitebook-640-14-inch-g11-display-assembly-replacement-p89",
 "title": "How to do an HP EliteBook 640 G11 display assembly replacement",
 "model": "hp-elitebook-640-g11",
 "model_name": "HP EliteBook 640 G11",
 "component": "display assembly",
 "manufacturer": "HP",
 "url": "https://laptoppartfinder.com/guides/hp-elitebook-640-14-inch-g11-display-assembly-replacement-p89/",
 "api_url": "https://laptoppartfinder.com/api/guides/hp-elitebook-640-14-inch-g11-display-assembly-replacement-p89",
 "source_url": "https://kaas.hpcloud.hp.com/pdf-public/pdf_10342196_en-US-1.pdf",
 "source_title": "HP Maintenance and Service Guide",
 "pages": "printed pages 89–95",
 "service_classification": null,
 "bench_tested": false,
 "markdown": "# HP EliteBook 640 G11 display assembly replacement\n\nSource: https://kaas.hpcloud.hp.com/pdf-public/pdf_10342196_en-US-1.pdf (printed pages 89–95). OEM-documented procedure; not bench-tested.\n\nHP EliteBook 640 14 inch G11 Notebook PC display assembly replacement. HP prints this procedure on printed page 89 of its maintenance and service guide.\n\n## Tools and parts\n\n- Screwdrivers and a non-marking pry tool as HP lists for this procedure\n- Static-safe work surface\n\n## Preparation\n\nSave your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.\n\n## Replacement\n\n1. (Select models only) Detach the antenna cables from the WWAN module. (printed page 89).\n2. (Choose models only) Detach the WWAN lead from the main board connector (2). (printed page 89).\n3. (Select models only) Take out the WWAN cable (printed page 89).\n4. Detach the antenna cables from the WLAN module. (printed page 89).\n5. Detach the display cable from carefully the system board ZIF connector. (printed page 89).\n6. Take out the display cable (printed page 90).\n7. Take out the six Phillips M2.5 × 4.0 screws that hold the display assembly to the computer. (printed page 90).\n8. Open the computer to approximately 170° (printed page 90).\n9. Separate the display assembly from the computer. (printed page 90).\n10. To remove the bezel: (printed page 91).\n11. To remove the display panel: (printed page 91).\n12. To remove an IR camera module: (printed page 92).\n13. To remove an FHD camera module: (printed page 93).\n14. To remove the ambient light sensor (ALS): (printed page 93).\n15. To remove the hinges from the display enclosure: (printed page 94).\n16. To remove the display panel/camera lead on models with an IR camera: (printed page 94).\n17. To remove the display panel/camera lead on models with an FHD camera: (printed page 95).\n18. To remove the wireless antennas and cables: (printed page 95).\n",
 "outcome": "found",
 "data_revision": "93b6f8041cad",
 "license": "Free to use with attribution: credit \"Laptop Part Finder\" and link to https://laptoppartfinder.com (or the page you used). Please do not republish or mirror the dataset in bulk without permission.",
 "attribution": "Laptop Part Finder (https://laptoppartfinder.com)",
 "terms_url": "https://laptoppartfinder.com/terms/#data-license"
}