{
 "slug": "hp-elitebook-645-g10-speaker-replacement-p61",
 "title": "How to do an HP EliteBook 645 G10 speaker replacement",
 "model": "hp-elitebook-645-g10",
 "model_name": "HP EliteBook 645 G10",
 "component": "speaker",
 "manufacturer": "HP",
 "url": "https://laptoppartfinder.com/guides/hp-elitebook-645-g10-speaker-replacement-p61/",
 "api_url": "https://laptoppartfinder.com/api/guides/hp-elitebook-645-g10-speaker-replacement-p61",
 "source_url": "https://kaas.hpcloud.hp.com/pdf-public/pdf_7618456_en-US-1.pdf",
 "source_title": "HP Maintenance and Service Guide",
 "pages": "printed pages 42–62",
 "service_classification": null,
 "bench_tested": false,
 "markdown": "# HP EliteBook 645 G10 speaker replacement\n\nSource: https://kaas.hpcloud.hp.com/pdf-public/pdf_7618456_en-US-1.pdf (printed pages 42–62). OEM-documented procedure; not bench-tested.\n\nHP EliteBook 645 G10 Notebook PC speaker replacement. HP prints this procedure on printed page 61 of its maintenance and service guide, and the spare-part table for this part is on printed page 20.\n\n## Tools and parts\n\n- Screwdrivers and a non-marking pry tool as HP lists for this procedure\n- Static-safe work surface\n- `M21400-001` - Speaker. Source: printed page 61.\n\n## Preparation\n\nSave your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.\n\n## Replacement\n\n1. Get the machine ready for taking apart (the Preparation for disassembly section is on page 39). (printed page 42).\n2. Take the bottom cover off (the Bottom cover section is on page 39). (printed page 42).\n3. Take the battery out (the Battery section is on page 49). (printed page 53).\n4. Take the fan (the Fan section is on page 55). (printed page 59).\n5. Take the main board (the main board section is on page 58). (printed page 61).\n6. Undo the Phillips M2.0 × 2.0 fastener (1) that holds the speaker to the machine. (printed page 61).\n7. Lift the speaker up and out of the machine (2). While fitting the speaker, check which the rubber cap is installed at the right end of the speaker (3). (printed page 62).\n8. Fit the replacement part by working back through the printed removal steps (printed page 62).\n",
 "outcome": "found",
 "data_revision": "93b6f8041cad",
 "license": "Free to use with attribution: credit \"Laptop Part Finder\" and link to https://laptoppartfinder.com (or the page you used). Please do not republish or mirror the dataset in bulk without permission.",
 "attribution": "Laptop Part Finder (https://laptoppartfinder.com)",
 "terms_url": "https://laptoppartfinder.com/terms/#data-license"
}