{
 "slug": "hp-elitebook-750-g1-system-board-replacement-p102",
 "title": "How to do an HP EliteBook 750 G1 system board replacement",
 "model": "hp-elitebook-750-g1",
 "model_name": "HP EliteBook 750 G1",
 "component": "system board",
 "manufacturer": "HP",
 "url": "https://laptoppartfinder.com/guides/hp-elitebook-750-g1-system-board-replacement-p102/",
 "api_url": "https://laptoppartfinder.com/api/guides/hp-elitebook-750-g1-system-board-replacement-p102",
 "source_url": "https://h10032.www1.hp.com/ctg/Manual/c04655205.pdf",
 "source_title": "HP Maintenance and Service Guide",
 "pages": "printed pages 102–105",
 "service_classification": null,
 "bench_tested": false,
 "markdown": "# HP EliteBook 750 G1 system board replacement\n\nSource: https://h10032.www1.hp.com/ctg/Manual/c04655205.pdf (printed pages 102–105). OEM-documented procedure; not bench-tested.\n\nHP EliteBook 750 G1 Notebook PC system board replacement. HP prints this procedure on printed page 102 of its maintenance and service guide.\n\n## tools and parts\n\n- Flat-bladed drivers, Magnetic drivers and Phillips P0 and P1 drivers\n- Static-safe work surface\n- No spare part number for this component was found in the cached manual\n\n## preparation\n\nHP prints its tools list and its handling and electrostatic-discharge cautions on printed page 53. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.\n\n## replacement\n\n1. Position computer upright and open as far as possible. (printed page 102).\n2. Let go of ZIF connector to which fingerprint reader cable is connected, and then disconnect fingerprint reader cable from the system board. (printed page 103).\n3. Close the computer and position it upside down. (printed page 103).\n4. Detach the smart card reader cable from the smart card reader. (printed page 103).\n5. Detach the VGA/USB board cable from the system board. (printed page 103).\n6. Detach the power button board cable off the system board. (printed page 103).\n7. Let go of display panel cable off routing channel attached to system board, and then disconnect display panel cable from the system board. (printed page 103).\n8. Detach the speaker cable from the system board. (printed page 103).\n9. Note the routing location of the antenna cables when removing them. (printed page 104).\n10. Take out the three Phillips PM2.5×5.0 screws that hold the system board to the top cover. (printed page 104).\n11. Lift the left side of the system board. (printed page 104).\n12. Take out system board by sliding it up and to left at an angle. (printed page 105).\n13. Put the system board back by repeating the printed removal moves in the opposite order (printed page 105).\n",
 "outcome": "found",
 "data_revision": "93b6f8041cad",
 "license": "Free to use with attribution: credit \"Laptop Part Finder\" and link to https://laptoppartfinder.com (or the page you used). Please do not republish or mirror the dataset in bulk without permission.",
 "attribution": "Laptop Part Finder (https://laptoppartfinder.com)",
 "terms_url": "https://laptoppartfinder.com/terms/#data-license"
}