{
 "slug": "hp-elitebook-755-g3-bottom-cover-replacement-p34",
 "title": "How to do an HP EliteBook 755 G3 bottom cover replacement",
 "model": "hp-elitebook-755-g3",
 "model_name": "HP EliteBook 755 G3",
 "component": "bottom cover",
 "manufacturer": "HP",
 "url": "https://laptoppartfinder.com/guides/hp-elitebook-755-g3-bottom-cover-replacement-p34/",
 "api_url": "https://laptoppartfinder.com/api/guides/hp-elitebook-755-g3-bottom-cover-replacement-p34",
 "source_url": "https://h10032.www1.hp.com/ctg/Manual/c04853478.pdf",
 "source_title": "HP Maintenance and Service Guide",
 "pages": "printed pages 34–37",
 "service_classification": null,
 "bench_tested": false,
 "markdown": "# HP EliteBook 755 G3 bottom cover replacement\n\nSource: https://h10032.www1.hp.com/ctg/Manual/c04853478.pdf (printed pages 34–37). OEM-documented procedure; not bench-tested.\n\nHP EliteBook 755 G3 Notebook PC bottom cover replacement. HP prints this procedure on printed page 34 of its maintenance and service guide.\n\n## Tools and parts\n\n- Screwdrivers and a non-marking pry tool as HP lists for this procedure\n- Static-safe work surface\n- `821162-001` - For 14” computers. Source: printed page 34.\n- `821181-001` - For 15” computers. Source: printed page 34.\n\n## Preparation\n\nSave your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.\n\n## Replacement\n\n1. Power the machine down. If you cannot tell whether the machine is off or in Hibernation, turn the machine on, and after that shut it down through the operating system. (printed page 34).\n2. Cut the power from the machine by unplugging the power cord from the machine. (printed page 34).\n3. Detach every external device from the machine. (printed page 34).\n4. Turn the machine upside down on a flat surface. (printed page 34).\n5. Take the 10 rubber plugs (1) as well as the SD card blank (2) out of the bottom cover. (printed page 35).\n6. Take the fasteners that hold the bottom cover to the machine. 14” computers a. Take the 10 Phillips PM2.5x5.0 fasteners in the order that follows. (printed page 35).\n7. Pry up on the top (near the screen hinge) of the lower cover to disengage it from the machine. (printed page 37).\n8. Fit the replacement part by working back through the printed removal steps (printed page 37).\n",
 "outcome": "found",
 "data_revision": "93b6f8041cad",
 "license": "Free to use with attribution: credit \"Laptop Part Finder\" and link to https://laptoppartfinder.com (or the page you used). Please do not republish or mirror the dataset in bulk without permission.",
 "attribution": "Laptop Part Finder (https://laptoppartfinder.com)",
 "terms_url": "https://laptoppartfinder.com/terms/#data-license"
}