{
 "slug": "hp-elitebook-755-g3-fingerprint-reader-assembly-replacement-p61",
 "title": "How to do an HP EliteBook 755 G3 fingerprint reader assembly replacement",
 "model": "hp-elitebook-755-g3",
 "model_name": "HP EliteBook 755 G3",
 "component": "fingerprint reader assembly",
 "manufacturer": "HP",
 "url": "https://laptoppartfinder.com/guides/hp-elitebook-755-g3-fingerprint-reader-assembly-replacement-p61/",
 "api_url": "https://laptoppartfinder.com/api/guides/hp-elitebook-755-g3-fingerprint-reader-assembly-replacement-p61",
 "source_url": "https://h10032.www1.hp.com/ctg/Manual/c04853478.pdf",
 "source_title": "HP Maintenance and Service Guide",
 "pages": "printed pages 39–62",
 "service_classification": null,
 "bench_tested": false,
 "markdown": "# HP EliteBook 755 G3 fingerprint reader assembly replacement\n\nSource: https://h10032.www1.hp.com/ctg/Manual/c04853478.pdf (printed pages 39–62). OEM-documented procedure; not bench-tested.\n\nHP EliteBook 755 G3 fingerprint reader assembly replacement. HP prints this procedure on printed page 61 of its maintenance and service guide, and the spare-part table for this part is on printed page 61.\n\n## tools and parts\n\n- Screwdrivers and a non-marking pry tool as HP lists for this procedure\n- Static-safe work surface\n- `821165-001` - Fingerprint reader assembly (includes cable, bracket, and bezel). Source: printed page 61.\n\n## preparation\n\nSave your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.\n\n1. Power the machine down. If you are unsure whether the machine is off or in Hibernation, turn the machine on, and after that shut it down through the operating system. (printed page 39).\n2. Detach every external device wired to the machine. (printed page 39).\n3. Cut the power by pulling the cord out of the wall outlet, and after that unplugging the AC adapter from the machine. (printed page 39).\n4. Take the bottom cover off (the Bottom cover section is on page 34). (printed page 39).\n5. Take the battery out (the Battery section is on page 39). (printed page 40).\n\n## replacement\n\n6. Take the following parts out: a. Keyboard (the Keyboard section is on page 50) b. Hard drive (the Hard drive section is on page 40) c. Internal base plate (the Internal base plate section is on page 55) (printed page 61).\n7. Detach the fingerprint reader board lead from the main board (1). (printed page 61).\n8. Lift the mylar cover, and take it from the machine (2). (printed page 61).\n9. Slide the bracket right, and after that lift it off the top cover (3). (printed page 61).\n10. Take the fingerprint reader board and lead assembly from the top cover (4). (printed page 62).\n11. Fit the replacement part by working back through the printed removal steps (printed page 62).\n\n",
 "outcome": "found",
 "data_revision": "93b6f8041cad",
 "license": "Free to use with attribution: credit \"Laptop Part Finder\" and link to https://laptoppartfinder.com (or the page you used). Please do not republish or mirror the dataset in bulk without permission.",
 "attribution": "Laptop Part Finder (https://laptoppartfinder.com)",
 "terms_url": "https://laptoppartfinder.com/terms/#data-license"
}