{
 "slug": "hp-elitebook-755-g3-hard-drive-replacement-p40",
 "title": "How to do an HP EliteBook 755 G3 hard drive replacement",
 "model": "hp-elitebook-755-g3",
 "model_name": "HP EliteBook 755 G3",
 "component": "hard drive",
 "manufacturer": "HP",
 "url": "https://laptoppartfinder.com/guides/hp-elitebook-755-g3-hard-drive-replacement-p40/",
 "api_url": "https://laptoppartfinder.com/api/guides/hp-elitebook-755-g3-hard-drive-replacement-p40",
 "source_url": "https://h10032.www1.hp.com/ctg/Manual/c04853478.pdf",
 "source_title": "HP Maintenance and Service Guide",
 "pages": "printed pages 39–41",
 "service_classification": null,
 "bench_tested": false,
 "markdown": "# HP EliteBook 755 G3 hard drive replacement\n\nSource: https://h10032.www1.hp.com/ctg/Manual/c04853478.pdf (printed pages 39–41). OEM-documented procedure; not bench-tested.\n\nHP EliteBook 755 G3 Notebook PC hard drive replacement. HP prints this procedure on printed page 40 of its maintenance and service guide, and the spare-part table for this part is on printed page 40.\n\n## tools and parts\n\n- Screwdrivers and a non-marking pry tool as HP lists for this procedure\n- Static-safe work surface\n- `762990-001` - 1 TB, 5400 rpm, 7 mm. Source: printed page 40.\n- `820572-001` - 500 GB, 7200 rpm, 7 mm, FIPS. Source: printed page 40.\n- `820573-001` - 500 GB, 7200 rpm, 7 mm, Opal-2. Source: printed page 40.\n- `703267-001` - 500 GB, 7200 rpm, 7 mm. Source: printed page 40.\n- `732000-001` - 500 GB, 5400 rpm, 7 mm, hybrid, 8 GB cache. Source: printed page 40.\n\n## preparation\n\nSave your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.\n\n1. Power the machine down. If you are unsure whether the machine is off or in Hibernation, turn the machine on, and after that shut it down through the operating system. (printed page 39).\n2. Detach every external device wired to the machine. (printed page 39).\n3. Cut the power by pulling the cord out of the wall outlet, and after that unplugging the AC adapter from the machine. (printed page 39).\n4. Take the bottom cover off (the Bottom cover section is on page 34). (printed page 39).\n\n## replacement\n\n5. Take the battery out (the Battery section is on page 39). (printed page 40).\n6. Back off the 4 captive fasteners (1) that hold the hard drive to the chassis. (printed page 40).\n7. Slide the hard drive (2) away out of the center of the machine to disengage it from the connector. (printed page 40).\n8. Lift to take the hard drive from the bay (3). (printed page 40).\n9. To take the hard drive cover as well as bracket out of the hard drive, raise the Mylar cover up off the drive, take the 4 Phillips PM3.0×3.0 fasteners (1) that hold the bracket to the drive, and after that raise the bracket upward and off the hard drive (2). (printed page 41).\n10. Fit the replacement part by working back through the printed removal steps (printed page 41).\n\n",
 "outcome": "found",
 "data_revision": "93b6f8041cad",
 "license": "Free to use with attribution: credit \"Laptop Part Finder\" and link to https://laptoppartfinder.com (or the page you used). Please do not republish or mirror the dataset in bulk without permission.",
 "attribution": "Laptop Part Finder (https://laptoppartfinder.com)",
 "terms_url": "https://laptoppartfinder.com/terms/#data-license"
}