{
 "slug": "hp-elitebook-755-g3-system-board-replacement-p71",
 "title": "How to do an HP EliteBook 755 G3 system board replacement",
 "model": "hp-elitebook-755-g3",
 "model_name": "HP EliteBook 755 G3",
 "component": "system board",
 "manufacturer": "HP",
 "url": "https://laptoppartfinder.com/guides/hp-elitebook-755-g3-system-board-replacement-p71/",
 "api_url": "https://laptoppartfinder.com/api/guides/hp-elitebook-755-g3-system-board-replacement-p71",
 "source_url": "https://h10032.www1.hp.com/ctg/Manual/c04853478.pdf",
 "source_title": "HP Maintenance and Service Guide",
 "pages": "printed pages 39–73",
 "service_classification": null,
 "bench_tested": false,
 "markdown": "# HP EliteBook 755 G3 system board replacement\n\nSource: https://h10032.www1.hp.com/ctg/Manual/c04853478.pdf (printed pages 39–73). OEM-documented procedure; not bench-tested.\n\nHP EliteBook 755 G3 Notebook PC system board replacement. HP prints this procedure on printed page 71 of its maintenance and service guide.\n\n## tools and parts\n\n- Screwdrivers and a non-marking pry tool as HP lists for this procedure\n- Static-safe work surface\n\n## preparation\n\nSave your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.\n\n1. Power the machine down. If you are unsure whether the machine is off or in Hibernation, turn the machine on, and after that shut it down through the operating system. (printed page 39).\n2. Detach every external device wired to the machine. (printed page 39).\n3. Cut the power by pulling the cord out of the wall outlet, and after that unplugging the AC adapter from the machine. (printed page 39).\n4. Take the bottom cover off (the Bottom cover section is on page 34). (printed page 39).\n5. Take the battery out (the Battery section is on page 39). (printed page 40).\n\n## replacement\n\n6. Take the following parts out: a. Keyboard (the Keyboard section is on page 50) b. Hard drive (the Hard drive section is on page 40) c. Internal base plate (the Internal base plate section is on page 55) d. Fingerprint reader assembly (the Fingerprint reader assembly section is on page 61) e. Power button board (the Power button board section is on page 62) f. USB/audio board (the USB/audio board section is on page 70) g. Smart card reader board (the Smart card reader board section is on page 68) (printed page 71).\n7. Detach those leads from the main board: (1) Speaker lead (2) Display lead (3) Webcam lead (choose products only) (printed page 72).\n8. On a 14” machine, take the 2 Phillips PM2.5×5.0 fasteners (1) that hold the main board to the machine. (printed page 73).\n9. Lift the right side of the main board up at an angle (2). (printed page 73).\n10. Pull the main board up and toward the right to lift it out from the machine (3). (printed page 73).\n11. Fit the replacement part by working back through the printed removal steps (printed page 73).\n\n",
 "outcome": "found",
 "data_revision": "93b6f8041cad",
 "license": "Free to use with attribution: credit \"Laptop Part Finder\" and link to https://laptoppartfinder.com (or the page you used). Please do not republish or mirror the dataset in bulk without permission.",
 "attribution": "Laptop Part Finder (https://laptoppartfinder.com)",
 "terms_url": "https://laptoppartfinder.com/terms/#data-license"
}