{
 "slug": "hp-elitebook-820-g2-notebook-pc-and-display-assembly-replacement-p61",
 "title": "How to do an HP EliteBook 820 G2 display assembly replacement",
 "model": "hp-elitebook-820-g2",
 "model_name": "HP EliteBook 820 G2",
 "component": "display assembly",
 "manufacturer": "HP",
 "url": "https://laptoppartfinder.com/guides/hp-elitebook-820-g2-notebook-pc-and-display-assembly-replacement-p61/",
 "api_url": "https://laptoppartfinder.com/api/guides/hp-elitebook-820-g2-notebook-pc-and-display-assembly-replacement-p61",
 "source_url": "https://h10032.www1.hp.com/ctg/Manual/c04775894.pdf",
 "source_title": "HP Maintenance and Service Guide",
 "pages": "printed pages 61–67",
 "service_classification": null,
 "bench_tested": false,
 "markdown": "# HP EliteBook 820 G2 display assembly replacement\n\nSource: https://h10032.www1.hp.com/ctg/Manual/c04775894.pdf (printed pages 61–67). OEM-documented procedure; not bench-tested.\n\nHP EliteBook 820 G2 Notebook PC and display assembly replacement. HP prints this procedure on printed page 61 of its maintenance and service guide.\n\n## Tools and parts\n\n- Screwdrivers and a non-marking pry tool as HP lists for this procedure\n- Static-safe work surface\n- `781838-001` - 12.5-in, AntiGlare, FHD, LED, UWVA, TouchScreen display assembly. Source: printed page 61.\n\n## Preparation\n\nSave your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.\n\n## Replacement\n\n1. Let go of the display panel cable from the routing clips and channel built into the base enclosure. (printed page 61).\n2. Let go of the wireless antenna cables from the routing clips and channel built into the base enclosure. (printed page 61).\n3. Take out the four Phillips PM2.5×4.5 screws that hold the display assembly to the base enclosure. (printed page 61).\n4. Take out the display assembly (2). (printed page 62).\n5. If it is necessary to replace the screen bezel or any of the screen assembly subcomponents: a. (printed page 62).\n6. If it is necessary to replace the screen panel (printed page 63).\n7. If it is needed to substitute the webcam/microphone unit or the microphone module: a. (printed page 64).\n8. If it is necessary to replace the screen panel lead (printed page 65).\n9. If it is necessary to replace the screen hinges, let go of the grounding tape (1) that holds the display hinges to the display enclosure, and then take out the six broad head Phillips PM2.0×3.0 screws (2) that hold the display hinges to the display enclosure. (printed page 65).\n10. If it is necessary to replace the WLAN aerial leads and transceivers: a. (printed page 66).\n11. If it is necessary to replace the WWAN aerial leads and transceivers: a. (printed page 67).\n12. Fit the replacement part by working back through the printed removal steps (printed page 67).\n\n",
 "outcome": "found",
 "data_revision": "93b6f8041cad",
 "license": "Free to use with attribution: credit \"Laptop Part Finder\" and link to https://laptoppartfinder.com (or the page you used). Please do not republish or mirror the dataset in bulk without permission.",
 "attribution": "Laptop Part Finder (https://laptoppartfinder.com)",
 "terms_url": "https://laptoppartfinder.com/terms/#data-license"
}