{
 "slug": "hp-elitebook-820-g2-notebook-pc-and-system-board-replacement-p76",
 "title": "How to do an HP EliteBook 820 G2 system board replacement",
 "model": "hp-elitebook-820-g2",
 "model_name": "HP EliteBook 820 G2",
 "component": "system board",
 "manufacturer": "HP",
 "url": "https://laptoppartfinder.com/guides/hp-elitebook-820-g2-notebook-pc-and-system-board-replacement-p76/",
 "api_url": "https://laptoppartfinder.com/api/guides/hp-elitebook-820-g2-notebook-pc-and-system-board-replacement-p76",
 "source_url": "https://h10032.www1.hp.com/ctg/Manual/c04775894.pdf",
 "source_title": "HP Maintenance and Service Guide",
 "pages": "printed pages 68–78",
 "service_classification": null,
 "bench_tested": false,
 "markdown": "# HP EliteBook 820 G2 system board replacement\n\nSource: https://h10032.www1.hp.com/ctg/Manual/c04775894.pdf (printed pages 68–78). OEM-documented procedure; not bench-tested.\n\nHP EliteBook 820 G2 Notebook PC and system board replacement. HP prints this procedure on printed page 76 of its maintenance and service guide.\n\n## tools and parts\n\n- Flat-bladed screw driver, Magnetic screw driver and Phillips P0 screw driver\n- Static-safe work surface\n- No spare part number for this component was found in the cached manual\n\n## preparation\n\nHP prints its tools list and its handling and electrostatic-discharge cautions on printed page 32. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.\n\n1. Turn top cover upside down with the front towards you. (printed page 68).\n\n## replacement\n\n2. Let go of ZIF connector to which power button board wire is attached, and then disconnect power button board cable from the system board. (printed page 77).\n3. Let go of ZIF connector to which fingerprint reader board wire is attached, and then disconnect fingerprint reader board cable from the system board. (printed page 77).\n4. Detach the speaker cable from the system board. (printed page 77).\n5. Take out the three Philllips PM2.0×3.0 screws that hold the system board to the top cover. (printed page 78).\n6. Lift up on right side of the system board until it rests at an angle. (printed page 78).\n7. Take out system board by sliding it up and to right at an angle. (printed page 78).\n8. Put the system board back by repeating the printed removal moves in the opposite order (printed page 78).\n\n",
 "outcome": "found",
 "data_revision": "93b6f8041cad",
 "license": "Free to use with attribution: credit \"Laptop Part Finder\" and link to https://laptoppartfinder.com (or the page you used). Please do not republish or mirror the dataset in bulk without permission.",
 "attribution": "Laptop Part Finder (https://laptoppartfinder.com)",
 "terms_url": "https://laptoppartfinder.com/terms/#data-license"
}