{
 "slug": "hp-elitebook-820-g2-notebook-pc-and-top-cover-replacement-p57",
 "title": "How to do an HP EliteBook 820 G2 top cover replacement",
 "model": "hp-elitebook-820-g2",
 "model_name": "HP EliteBook 820 G2",
 "component": "top cover",
 "manufacturer": "HP",
 "url": "https://laptoppartfinder.com/guides/hp-elitebook-820-g2-notebook-pc-and-top-cover-replacement-p57/",
 "api_url": "https://laptoppartfinder.com/api/guides/hp-elitebook-820-g2-notebook-pc-and-top-cover-replacement-p57",
 "source_url": "https://h10032.www1.hp.com/ctg/Manual/c04775894.pdf",
 "source_title": "HP Maintenance and Service Guide",
 "pages": "printed pages 57–60",
 "service_classification": null,
 "bench_tested": false,
 "markdown": "# HP EliteBook 820 G2 top cover replacement\n\nSource: https://h10032.www1.hp.com/ctg/Manual/c04775894.pdf (printed pages 57–60). OEM-documented procedure; not bench-tested.\n\nHP EliteBook 820 G2 Notebook PC and top cover replacement. HP prints this procedure on printed page 57 of its maintenance and service guide, and the spare-part table for this part is on printed page 57.\n\n## tools and parts\n\n- Flat-bladed screw driver, Magnetic screw driver and Phillips P0 screw driver\n- Static-safe work surface\n- `783215-001` - Top cover. Source: printed page 57.\n\n## preparation\n\nHP prints its tools list and its handling and electrostatic-discharge cautions on printed page 32. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.\n\n## replacement\n\n1. Close computer. 2. Turn computer upside down with the front toward you. (printed page 57).\n2. Set the computer on its face with the front toward you. (printed page 57).\n3. Take out the Phillips PM2.0×3.25 screw that holds the display panel cable bracket and display panel lead to the system board. (printed page 57).\n4. Take out the display panel cable bracket (2). (printed page 57).\n5. Detach the display panel cable from the system board. (printed page 58).\n6. Take out the following rubber screw covers: This screw cover has “1” marking on the inside of the cover These screw covers have “2” marking on the inside of the cover These screw covers have “3” marking on the inside of the cover (printed page 58).\n7. Take out the card reader bezel from the card reader slot. (printed page 58).\n8. Take out the ten Torx T8M2.5×6.5 screws that hold the top cover to the base enclosure. (printed page 59).\n9. Take out the following screws that hold the top cover to the base enclosure: One Phillips PM2.0×6.5 screw Three Phillips PM2.5×4.5 screws Two Phillips PM2.0×3.0 screws (printed page 59).\n10. Take out the two Phillips PM2.5×4.5 screws that hold the top cover to the base enclosure. (printed page 59).\n11. Take out the top cover (2). (printed page 60).\n12. Put the top cover back by repeating the printed removal moves in the opposite order (printed page 60).\n",
 "outcome": "found",
 "data_revision": "93b6f8041cad",
 "license": "Free to use with attribution: credit \"Laptop Part Finder\" and link to https://laptoppartfinder.com (or the page you used). Please do not republish or mirror the dataset in bulk without permission.",
 "attribution": "Laptop Part Finder (https://laptoppartfinder.com)",
 "terms_url": "https://laptoppartfinder.com/terms/#data-license"
}