{
 "slug": "hp-elitebook-830-g5-system-board-replacement-p67",
 "title": "How to do an HP EliteBook 830 G5 system board replacement",
 "model": "hp-elitebook-830-g5",
 "model_name": "HP EliteBook 830 G5",
 "component": "system board",
 "manufacturer": "HP",
 "url": "https://laptoppartfinder.com/guides/hp-elitebook-830-g5-system-board-replacement-p67/",
 "api_url": "https://laptoppartfinder.com/api/guides/hp-elitebook-830-g5-system-board-replacement-p67",
 "source_url": "https://h10032.www1.hp.com/ctg/Manual/c06189588.pdf",
 "source_title": "HP Maintenance and Service Guide",
 "pages": "printed pages 68–70",
 "service_classification": null,
 "bench_tested": false,
 "markdown": "# HP EliteBook 830 G5 system board replacement\n\nSource: https://h10032.www1.hp.com/ctg/Manual/c06189588.pdf (printed pages 68–70). OEM-documented procedure; not bench-tested.\n\nHP EliteBook 830 G5 Notebook PC system board replacement. HP prints this procedure on printed page 67 of its maintenance and service guide.\n\n## tools and parts\n\n- Screwdrivers and a non-marking pry tool as HP lists for this procedure\n- Static-safe work surface\n- `L13712-001` - Intel i7-8650U processor. Source: printed page 67.\n- `L13711-001` - Intel i7-8550U processor. Source: printed page 67.\n- `L13710-001` - Intel i5-8350U processor. Source: printed page 67.\n- `L13709-001` - Intel i5-8250U processor. Source: printed page 67.\n- `L32726-001` - Intel i5-8130U processor. Source: printed page 67.\n- `L42314-001` - Intel i7-7600U processor. Source: printed page 67.\n- `L42313-001` - Intel i7-7500U processor. Source: printed page 67.\n- `L13708-001` - Intel i5-7300U processor. Source: printed page 67.\n- `L13707-001` - Intel i5-7200U processor. Source: printed page 67.\n\n## preparation\n\nSave your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.\n\n## replacement\n\n1. Position the computer upright (printed page 68).\n2. Take out the two Phillips M2.0×3.0 screws that hold the system board to the computer. (printed page 68).\n3. Close the computer and position it upside down. (printed page 68).\n4. Detach the following cables from the system board: (printed page 69).\n5. Take out the one Phillips M2.0×3.0 screw that holds the USB bracket to the computer, then remove (printed page 69).\n6. Take out the six Phillips M2.0×3.0 screws that hold the system board to the computer. (printed page 70).\n7. Lift the right side of the main board up at an angle (1). (printed page 70).\n8. Pull the system board up (printed page 70).\n9. Fit the replacement part by working back through the printed removal steps (printed page 70).\n\n",
 "outcome": "found",
 "data_revision": "93b6f8041cad",
 "license": "Free to use with attribution: credit \"Laptop Part Finder\" and link to https://laptoppartfinder.com (or the page you used). Please do not republish or mirror the dataset in bulk without permission.",
 "attribution": "Laptop Part Finder (https://laptoppartfinder.com)",
 "terms_url": "https://laptoppartfinder.com/terms/#data-license"
}