{
 "slug": "hp-elitebook-840-g2-display-assembly-replacement-p105",
 "title": "How to do an HP EliteBook 840 G2 display assembly replacement",
 "model": "hp-elitebook-840-g2",
 "model_name": "HP EliteBook 840 G2",
 "component": "display assembly",
 "manufacturer": "HP",
 "url": "https://laptoppartfinder.com/guides/hp-elitebook-840-g2-display-assembly-replacement-p105/",
 "api_url": "https://laptoppartfinder.com/api/guides/hp-elitebook-840-g2-display-assembly-replacement-p105",
 "source_url": "https://h10032.www1.hp.com/ctg/Manual/c04560057.pdf",
 "source_title": "HP Maintenance and Service Guide",
 "pages": "printed pages 105–109",
 "service_classification": null,
 "bench_tested": false,
 "markdown": "# HP EliteBook 840 G2 display assembly replacement\n\nSource: https://h10032.www1.hp.com/ctg/Manual/c04560057.pdf (printed pages 105–109). OEM-documented procedure; not bench-tested.\n\nHP EliteBook 840 G2 Notebook PC display assembly replacement. HP prints this procedure on printed page 105 of its maintenance and service guide.\n\n## tools and parts\n\n- Flat-bladed drivers, Magnetic drivers and Phillips P0 and P1 drivers\n- Static-safe work surface\n- No spare part number for this component was found in the cached manual\n\n## preparation\n\nHP prints its tools list and its handling and electrostatic-discharge cautions on printed page 51. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.\n\n## replacement\n\n1. Let go of display panel cable from routing channel built into system board, and then disconnect display panel cable from the system board. (printed page 105).\n2. Let go of the wireless antenna cables off the routing channel built into the system board. (printed page 106).\n3. Take out the four Torx TM2.5×6.0 screws that hold the display panel to the top cover. (printed page 106).\n4. Rotate the display hinges back until the top cover is free for take-out. (printed page 106).\n5. Separate the display assembly from the top cover. (printed page 106).\n6. To remove display bezel, flex inside edges of bottom edge (1), left and right sides (2), and bottom edge of the bezel until the bezel disengages off the display enclosure. (printed page 106).\n7. Take off the bezel (4). (printed page 107).\n8. To remove the display hinges: a. Take out the display bezel. b. Take out the display panel. c. (printed page 107).\n9. To remove display panel cable: a. Take out display bezel. b. Take out display panel. c. Lift cable straight up and out of the panel enclosure. (printed page 108).\n10. To remove WLAN/WWAN antenna cables and transceivers: (printed page 108).\n11. Put the display assembly back by repeating the printed removal moves in the opposite order (printed page 109).\n\n",
 "outcome": "found",
 "data_revision": "93b6f8041cad",
 "license": "Free to use with attribution: credit \"Laptop Part Finder\" and link to https://laptoppartfinder.com (or the page you used). Please do not republish or mirror the dataset in bulk without permission.",
 "attribution": "Laptop Part Finder (https://laptoppartfinder.com)",
 "terms_url": "https://laptoppartfinder.com/terms/#data-license"
}