{
 "slug": "hp-elitebook-850-g2-usb-vga-connector-board-replacement-p79",
 "title": "How to do an HP EliteBook 850 G2 USB/VGA connector board replacement",
 "model": "hp-elitebook-850-g2",
 "model_name": "HP EliteBook 850 G2",
 "component": "USB/VGA connector board",
 "manufacturer": "HP",
 "url": "https://laptoppartfinder.com/guides/hp-elitebook-850-g2-usb-vga-connector-board-replacement-p79/",
 "api_url": "https://laptoppartfinder.com/api/guides/hp-elitebook-850-g2-usb-vga-connector-board-replacement-p79",
 "source_url": "https://h10032.www1.hp.com/ctg/Manual/c04551620.pdf",
 "source_title": "HP Maintenance and Service Guide",
 "pages": "printed pages 48–80",
 "service_classification": null,
 "bench_tested": false,
 "markdown": "# HP EliteBook 850 G2 USB/VGA connector board replacement\n\nSource: https://h10032.www1.hp.com/ctg/Manual/c04551620.pdf (printed pages 48–80). OEM-documented procedure; not bench-tested.\n\nHP EliteBook 850 G2 Notebook PC USB/VGA connector board replacement. HP prints this procedure on printed page 79 of its maintenance and service guide, and the spare-part table for this part is on printed page 31.\n\n## Tools and parts\n\n- Screwdrivers and a non-marking pry tool as HP lists for this procedure\n- Static-safe work surface\n- `784780-001` - USB/VGA connector board (includes cable). Source: printed page 79.\n\n## Preparation\n\nSave your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.\n\n## Replacement\n\n1. Power the machine down. If you cannot tell whether the machine is off or in Hibernation, turn the machine on, and after that shut it down through the operating system. (printed page 48).\n2. Cut the power from the machine by unplugging the power cord from the machine. (printed page 48).\n3. Detach every external device from the machine. (printed page 48).\n4. Take the service cover off (the Service cover section is on page 47), and after that take the following parts out: (printed page 73).\n5. Free the ZIF connector (1) that carries the USB/VGA connector board lead is connected, and after that detach the USB/VGA connector board lead from the main board. (printed page 79).\n6. Take the two Phillips PM2.0×8.0 fasteners (2) that hold the USB/VGA connector board to the upper cover. (printed page 79).\n7. Free the USB/VGA connector board (3) out of the openings in the base enclosure. (printed page 80).\n8. Take the USB/VGA connector board (4) and lead by sliding them away from the heat sink. (printed page 80).\n9. Fit the replacement part by working back through the printed removal steps (printed page 80).\n",
 "outcome": "found",
 "data_revision": "93b6f8041cad",
 "license": "Free to use with attribution: credit \"Laptop Part Finder\" and link to https://laptoppartfinder.com (or the page you used). Please do not republish or mirror the dataset in bulk without permission.",
 "attribution": "Laptop Part Finder (https://laptoppartfinder.com)",
 "terms_url": "https://laptoppartfinder.com/terms/#data-license"
}