{
 "slug": "hp-elitebook-850-g4-system-board-replacement-p66",
 "title": "How to do an HP EliteBook 850 G4 system board replacement",
 "model": "hp-elitebook-850-g4",
 "model_name": "HP EliteBook 850 G4",
 "component": "system board",
 "manufacturer": "HP",
 "url": "https://laptoppartfinder.com/guides/hp-elitebook-850-g4-system-board-replacement-p66/",
 "api_url": "https://laptoppartfinder.com/api/guides/hp-elitebook-850-g4-system-board-replacement-p66",
 "source_url": "https://h10032.www1.hp.com/ctg/Manual/c05357619.pdf",
 "source_title": "HP Maintenance and Service Guide",
 "pages": "printed pages 66–68",
 "service_classification": null,
 "bench_tested": false,
 "markdown": "# HP EliteBook 850 G4 system board replacement\n\nSource: https://h10032.www1.hp.com/ctg/Manual/c05357619.pdf (printed pages 66–68). OEM-documented procedure; not bench-tested.\n\nHP EliteBook 850 G4 Notebook PC system board replacement. HP prints this procedure on printed page 66 of its maintenance and service guide.\n\n## Tools and parts\n\n- Screwdrivers and a non-marking pry tool as HP lists for this procedure\n- Static-safe work surface\n\n## Preparation\n\nSave your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.\n\n## Replacement\n\n1. Position the computer upright (printed page 66).\n2. Detach the card reader cable and the fingerprint reader cable from the system board by lifting (printed page 66).\n3. Close the computer and position it upside down. (printed page 66).\n4. Detach the following cables from the system board: (printed page 67).\n5. Take out the 2 Phillips M2.5×5.0 screws that hold the system board to the computer. (printed page 67).\n6. Lift the right side of the main board up at an angle (2). (printed page 67).\n7. Pull the main board towards the right to disengage the connectors away from the left side of the machine, and after that take the main board (3). (printed page 68).\n8. Fit the replacement part by working back through the printed removal steps (printed page 68).\n",
 "outcome": "found",
 "data_revision": "93b6f8041cad",
 "license": "Free to use with attribution: credit \"Laptop Part Finder\" and link to https://laptoppartfinder.com (or the page you used). Please do not republish or mirror the dataset in bulk without permission.",
 "attribution": "Laptop Part Finder (https://laptoppartfinder.com)",
 "terms_url": "https://laptoppartfinder.com/terms/#data-license"
}