{
 "slug": "hp-elitebook-x360-1030-g4-heat-sink-fan-assembly-replacement-p44",
 "title": "How to do an HP EliteBook x360 1030 G4 heat sink/fan assembly replacement",
 "model": "hp-elitebook-x360-1030-g4",
 "model_name": "HP EliteBook x360 1030 G4",
 "component": "heat sink/fan assembly",
 "manufacturer": "HP",
 "url": "https://laptoppartfinder.com/guides/hp-elitebook-x360-1030-g4-heat-sink-fan-assembly-replacement-p44/",
 "api_url": "https://laptoppartfinder.com/api/guides/hp-elitebook-x360-1030-g4-heat-sink-fan-assembly-replacement-p44",
 "source_url": "https://kaas.hpcloud.hp.com/pdf-public/pdf_12667748_en-US-1.pdf",
 "source_title": "HP Maintenance and Service Guide",
 "pages": "printed pages 44–45",
 "service_classification": null,
 "bench_tested": false,
 "markdown": "# HP EliteBook x360 1030 G4 heat sink/fan assembly replacement\n\nSource: https://kaas.hpcloud.hp.com/pdf-public/pdf_12667748_en-US-1.pdf (printed pages 44–45). OEM-documented procedure; not bench-tested.\n\nHP EliteBook x360 1030 G4 heat sink/fan assembly replacement. HP prints this procedure on printed page 44 of its maintenance and service guide.\n\n## Tools and parts\n\n- Screwdrivers and a non-marking pry tool as HP lists for this procedure\n- Static-safe work surface\n- `L70756-001` - Heat sink/fan assembly. Source: printed page 44.\n\n## Preparation\n\nSave your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.\n\n## Replacement\n\n1. Take out the top screw holder off the system board by removing the screw and lifting the holder (printed page 44).\n2. Lift the tape off the heat sink. (1). (printed page 44).\n3. Detach the two fan cables carefully from the system board (2). (printed page 44).\n4. Loosen the four captive Phillips screws that hold the heat sink (3). (printed page 44).\n5. Loosen the five captive Phillips screws that hold the fans (4). (printed page 44).\n6. Take out the heat sink/fan assembly from the system card (5). (printed page 45).\n7. Apply thermal grease to the integrated processor at the main board (1) as well as associated location on the heat sink (2). (printed page 45).\n8. Fit the replacement part by working back through the printed removal steps (printed page 45).\n",
 "outcome": "found",
 "data_revision": "93b6f8041cad",
 "license": "Free to use with attribution: credit \"Laptop Part Finder\" and link to https://laptoppartfinder.com (or the page you used). Please do not republish or mirror the dataset in bulk without permission.",
 "attribution": "Laptop Part Finder (https://laptoppartfinder.com)",
 "terms_url": "https://laptoppartfinder.com/terms/#data-license"
}