{
 "slug": "hp-fortis-flip-g1i-11-inch-chromebook-display-assembly-replacement-p53",
 "title": "How to do an HP Fortis Flip G1i 11 inch Chromebook display assembly replacement",
 "model": "hp-fortis-flip-g1i-11-chromebook",
 "model_name": "HP Fortis Flip G1i 11 inch Chromebook",
 "component": "display assembly",
 "manufacturer": "HP",
 "url": "https://laptoppartfinder.com/guides/hp-fortis-flip-g1i-11-inch-chromebook-display-assembly-replacement-p53/",
 "api_url": "https://laptoppartfinder.com/api/guides/hp-fortis-flip-g1i-11-inch-chromebook-display-assembly-replacement-p53",
 "source_url": "https://kaas.hpcloud.hp.com/pdf-public/pdf_11614771_en-US-1.pdf",
 "source_title": "HP Maintenance and Service Guide",
 "pages": "printed pages 53–58",
 "service_classification": null,
 "bench_tested": false,
 "markdown": "# HP Fortis Flip G1i 11 inch Chromebook display assembly replacement\n\nSource: https://kaas.hpcloud.hp.com/pdf-public/pdf_11614771_en-US-1.pdf (printed pages 53–58). OEM-documented procedure; not bench-tested.\n\nHP Fortis Flip G1i 11 inch Chromebook display assembly replacement. HP prints this procedure on printed page 53 of its maintenance and service guide.\n\n## tools and parts\n\n- Tweezers, Nonconductive, nonmarking pry tool and Magnetic Phillips P1 drivers\n- Static-safe work surface\n- No spare part number for this component was found in the cached manual\n\n## preparation\n\nHP prints its tools list and its handling and electrostatic-discharge cautions on printed page 19. Its preparation for disassembly is on printed page 28: power the unit down through the operating system, unplug the power cord and detach every external device before opening it. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.\n\n## replacement\n\n1. Take out the four Phillips M2.5 × 4.5 screws that hold the display assembly to the computer. (printed page 53).\n2. Lift the tape that covers the display plug on the system board. The tape does not have to come off entirely. (printed page 53).\n3. Detach display cable from ZIF connector on the system board. (printed page 53).\n4. Lift the tape that covers the display camera plug on the system board. The tape does not have to come off entirely. (printed page 53).\n5. Detach cable from ZIF connector on the system board. (printed page 53).\n6. Take out Phillips M2.0 × 3.0 screw holds from bracket on WWAN module, and then remove the bracket. (printed page 53).\n7. Detach the antenna cables from the WWAN module. (printed page 54).\n8. Swing the display open to 90° (1), and then separate the display from the computer. (printed page 54).\n9. To remove display panel from the display assembly: (printed page 54).\n10. To remove hinges from the display rear cover: a. Take out the three Phillips M2.5 × 2.5 broadhead screws from each hinge. b. Take out the rubber insert from each hinge cover. c. Take out the cables from under each hinge cover. (printed page 55).\n11. To remove camera module: a. Detach cable from ZIF connector on the camera module. (printed page 56).\n12. To remove camera cable, disconnect cable from ZIF connector on camera module. Peel cable off the inside of the display rear panel. (printed page 57).\n13. To remove touch control board, disconnect cables from two large ZIF connectors on board. Detach small cable from end of the board, and then use tool to release the board. (printed page 57).\n14. To remove sensor board, disconnect the cable from the board, and then use a tool to release the board. (printed page 58).\n15. To remove the WWAN antennas and cables: (printed page 58).\n",
 "outcome": "found",
 "data_revision": "93b6f8041cad",
 "license": "Free to use with attribution: credit \"Laptop Part Finder\" and link to https://laptoppartfinder.com (or the page you used). Please do not republish or mirror the dataset in bulk without permission.",
 "attribution": "Laptop Part Finder (https://laptoppartfinder.com)",
 "terms_url": "https://laptoppartfinder.com/terms/#data-license"
}