{
 "slug": "hp-fortis-g1i-11-inch-chromebook-touchpad-replacement-p40",
 "title": "How to do an HP Fortis G1i 11 inch Chromebook touchpad replacement",
 "model": "hp-fortis-g1i-11-chromebook",
 "model_name": "HP Fortis G1i 11 inch Chromebook",
 "component": "touchpad",
 "manufacturer": "HP",
 "url": "https://laptoppartfinder.com/guides/hp-fortis-g1i-11-inch-chromebook-touchpad-replacement-p40/",
 "api_url": "https://laptoppartfinder.com/api/guides/hp-fortis-g1i-11-inch-chromebook-touchpad-replacement-p40",
 "source_url": "https://kaas.hpcloud.hp.com/pdf-public/pdf_11634507_en-US-1.pdf",
 "source_title": "HP Maintenance and Service Guide",
 "pages": "printed pages 41–42",
 "service_classification": null,
 "bench_tested": false,
 "markdown": "# HP Fortis G1i 11 inch Chromebook touchpad replacement\n\nSource: https://kaas.hpcloud.hp.com/pdf-public/pdf_11634507_en-US-1.pdf (printed pages 41–42). OEM-documented procedure; not bench-tested.\n\nHP Fortis G1i 11 inch Chromebook touchpad replacement. HP prints this procedure on printed page 40 of its maintenance and service guide, and the spare-part table for this part is on printed page 40.\n\n## tools and parts\n\n- Tweezers, Nonconductive, nonmarking pry tool and Magnetic Phillips P1 drivers\n- Static-safe work surface\n- `N85230-001` - Touchpad, flint gray. Source: printed page 40.\n- `N85231-001` - Touchpad, galactic blue. Source: printed page 40.\n- `N85232-001` - Touchpad cable (available in the Cable Kit). Source: printed page 40.\n- `N91997-001` - Touchpad bracket. Source: printed page 40.\n\n## preparation\n\nHP prints its tools list and its handling and electrostatic-discharge cautions on printed page 19. Its preparation for disassembly is on printed page 28: power the unit down through the operating system, unplug the power cord and detach every external device before opening it. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.\n\n## replacement\n\n1. Take out four Phillips M2.0 × 2.5 screws from touchpad bracket, and then remove the bracket. (printed page 41).\n2. Take out the tape from the touchpad. (printed page 41).\n3. Detach cable from the ZIF connector on the touchpad. (printed page 41).\n4. Lift the protective tape that covers the screws at the upper of the touchpad. (printed page 41).\n5. Take out gray conductive tape from touchpad. Leave other end of the tape connected to the notebook. When you replace the tape, be sure it touches the touchpad after replacement. (printed page 41).\n6. Take out the three Phillips M2.0 × 2.5 screws from the touchpad. (printed page 41).\n7. Take out the touchpad from the computer. (printed page 41).\n8. When installing touchpad and bracket, be sure that rubber bumper is installed on bottom of the touchpad mount in the location shown in the following illustration. (printed page 42).\n\n",
 "outcome": "found",
 "data_revision": "93b6f8041cad",
 "license": "Free to use with attribution: credit \"Laptop Part Finder\" and link to https://laptoppartfinder.com (or the page you used). Please do not republish or mirror the dataset in bulk without permission.",
 "attribution": "Laptop Part Finder (https://laptoppartfinder.com)",
 "terms_url": "https://laptoppartfinder.com/terms/#data-license"
}