{
 "slug": "hp-fortis-g1m-11-inch-chromebook-display-assembly-replacement-p45",
 "title": "How to do an HP Fortis G1m 11 inch Chromebook display assembly replacement",
 "model": "hp-fortis-g1m-11-chromebook",
 "model_name": "HP Fortis G1m 11 inch Chromebook",
 "component": "display assembly",
 "manufacturer": "HP",
 "url": "https://laptoppartfinder.com/guides/hp-fortis-g1m-11-inch-chromebook-display-assembly-replacement-p45/",
 "api_url": "https://laptoppartfinder.com/api/guides/hp-fortis-g1m-11-inch-chromebook-display-assembly-replacement-p45",
 "source_url": "https://kaas.hpcloud.hp.com/pdf-public/pdf_11429778_en-US-1.pdf",
 "source_title": "HP Maintenance and Service Guide",
 "pages": "printed pages 45–51",
 "service_classification": null,
 "bench_tested": false,
 "markdown": "# HP Fortis G1m 11 inch Chromebook display assembly replacement\n\nSource: https://kaas.hpcloud.hp.com/pdf-public/pdf_11429778_en-US-1.pdf (printed pages 45–51). OEM-documented procedure; not bench-tested.\n\nHP Fortis G1m 11 inch Chromebook display assembly replacement. HP prints this procedure on printed page 45 of its maintenance and service guide.\n\n## tools and parts\n\n- Tweezers, Nonconductive, nonmarking pry tool and Magnetic Phillips P1 drivers\n- Static-safe work surface\n- No spare part number for this component was found in the cached manual\n\n## preparation\n\nHP prints its tools list and its handling and electrostatic-discharge cautions on printed page 16. Its preparation for disassembly is on printed page 25: power the unit down through the operating system, unplug the power cord and detach every external device before opening it. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.\n\n## replacement\n\n1. Take out the plastic antenna protector from the WLAN module. (printed page 45).\n2. Detach the antenna cables from the WLAN module. (printed page 45).\n3. Take out the antenna cables from the clips along the upper of the computer. (printed page 45).\n4. Detach display cable from ZIF connector on the system board. (printed page 45).\n5. Take out the display cable from the clips along the top of the computer. (printed page 45).\n6. Take out the six Phillips M2.5 × 3.5 screws that hold the display assembly to the computer. (printed page 45).\n7. Swing the display open to 90° (1), and then separate the display from the computer. (printed page 46).\n8. To remove display panel from display assembly: a. Release top, left, and right sides of bezel from the display. b. Rotate the hinges until they are parallel with the display. (printed page 46).\n9. Take out two Phillips M2.0 × 2.5 screws from top display bracket, and then remove bracket from the display back cover. (printed page 49).\n10. To remove hinges from the display rear cover: a. Take out the three Phillips M2.5 × 2.5 broadhead screws from each hinge. b. Take out the hinges from the display back cover. (printed page 49).\n11. To remove camera module: a. Lift cable off upper of connector on camera module. b. Detach cable from the ZIF connector on the module. (printed page 49).\n12. To remove display/camera cable, disconnect cable from ZIF connector on camera module. Peel cable off inside of display rear cover, and then remove cable from the clips along the underside of the display rear cover. (printed page 50).\n13. To remove WLAN antennas and cables, release cables from clips along lower side and sides on display rear cover, and then peel antennas off the cover. (printed page 51).\n",
 "outcome": "found",
 "data_revision": "93b6f8041cad",
 "license": "Free to use with attribution: credit \"Laptop Part Finder\" and link to https://laptoppartfinder.com (or the page you used). Please do not republish or mirror the dataset in bulk without permission.",
 "attribution": "Laptop Part Finder (https://laptoppartfinder.com)",
 "terms_url": "https://laptoppartfinder.com/terms/#data-license"
}