{
 "slug": "hp-fortis-g2m-14-inch-chromebook-enterprise-display-assembly-replacement-p52",
 "title": "How to do an HP Fortis G2m 14 inch Chromebook display assembly replacement",
 "model": "hp-fortis-g2m-14-chromebook",
 "model_name": "HP Fortis G2m 14 inch Chromebook",
 "component": "display assembly",
 "manufacturer": "HP",
 "url": "https://laptoppartfinder.com/guides/hp-fortis-g2m-14-inch-chromebook-enterprise-display-assembly-replacement-p52/",
 "api_url": "https://laptoppartfinder.com/api/guides/hp-fortis-g2m-14-inch-chromebook-enterprise-display-assembly-replacement-p52",
 "source_url": "https://kaas.hpcloud.hp.com/pdf-public/pdf_15396858_en-US-1.pdf",
 "source_title": "HP Maintenance and Service Guide",
 "pages": "printed pages 53–60",
 "service_classification": null,
 "bench_tested": false,
 "markdown": "# HP Fortis G2m 14 inch Chromebook display assembly replacement\n\nSource: https://kaas.hpcloud.hp.com/pdf-public/pdf_15396858_en-US-1.pdf (printed pages 53–60). OEM-documented procedure; not bench-tested.\n\nHP Fortis G2m 14 inch Chromebook Enterprise display assembly replacement. HP prints this procedure on printed page 52 of its maintenance and service guide.\n\n## tools and parts\n\n- Tweezers, Nonconductive, nonmarking pry tool and Magnetic Phillips P1 drivers\n- Static-safe work surface\n- No spare part number for this component was found in the cached manual\n\n## preparation\n\nHP prints its tools list and its handling and electrostatic-discharge cautions on printed page 17. Its preparation for disassembly is on printed page 25: power the unit down through the operating system, unplug the power cord and detach every external device before opening it. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.\n\n## replacement\n\n1. Swing the display open and place the computer with the keyboard facing down and the panel hanging down off the side of a table. (printed page 53).\n2. Take out plastic protector from antenna connectors on WLAN module, and then disconnect the antenna cables from the WLAN module. (printed page 53).\n3. Detach display cable from ZIF connector on the system board. (printed page 53).\n4. Take out the display cable from the clip at the top of the computer. (printed page 53).\n5. Take out the seven Phillips M2.0 × 4.5 screws that hold the display assembly to the computer. (printed page 54).\n6. Separate the display from the computer. (printed page 54).\n7. To remove bezel, following these steps: a. Insert a pick into the seam inside the bezel and draw the pick around all four sides of the panel. b. (printed page 54).\n8. To remove display panel: a. Use tweezers to grasp stretchable tape from bottom right side of bezel, and then carefully pull the tape out. b. Lift the top of the panel and place it upside down next to the panel rear cover. (printed page 56).\n9. To remove display cable: a. Position removed display panel upside down on protected surface. b. Peel conductive tape off connector on bottom of panel. c. Open locking bar (2), and then disconnect cable from the panel. (printed page 57).\n10. To remove the camera module: (printed page 57).\n11. To remove display/camera cable: a. Detach cable from ZIF connector on the camera module. b. Take out the cable from the clips at the bottom right of the display rear panel. (printed page 58).\n12. To remove the hinges and hinge covers: a. Take out five Phillips M2.0 × 3.0 screws from each hinge. b. Use a tool to release the hinges from the display rear cover. (printed page 59).\n13. To remove the WLAN antennas and cables: a. Take out the antenna cables off the clips at the lower side left of the display rear cover. b. Take out the cables from the clips on the inside of the panel rear cover. (printed page 59).\n14. To remove WWAN antennas and cables: a. Take out antenna cables off clips along lower side and top of display back cover. b. Peel the antennas off the display back cover. (printed page 60).\n15. Put the display assembly back by repeating the printed removal moves in the opposite order (printed page 60).\n\n",
 "outcome": "found",
 "data_revision": "93b6f8041cad",
 "license": "Free to use with attribution: credit \"Laptop Part Finder\" and link to https://laptoppartfinder.com (or the page you used). Please do not republish or mirror the dataset in bulk without permission.",
 "attribution": "Laptop Part Finder (https://laptoppartfinder.com)",
 "terms_url": "https://laptoppartfinder.com/terms/#data-license"
}