{
 "slug": "hp-fortis-x360-11-inch-g5-chromebook-display-assembly-replacement-p45",
 "title": "How to do an HP Fortis x360 11 inch G5 Chromebook display assembly replacement",
 "model": "hp-fortis-x360-11-g5-chromebook",
 "model_name": "HP Fortis x360 11 inch G5 Chromebook",
 "component": "display assembly",
 "manufacturer": "HP",
 "url": "https://laptoppartfinder.com/guides/hp-fortis-x360-11-inch-g5-chromebook-display-assembly-replacement-p45/",
 "api_url": "https://laptoppartfinder.com/api/guides/hp-fortis-x360-11-inch-g5-chromebook-display-assembly-replacement-p45",
 "source_url": "https://kaas.hpcloud.hp.com/pdf-public/pdf_9833028_en-US-1.pdf",
 "source_title": "HP Maintenance and Service Guide",
 "pages": "printed pages 45–50",
 "service_classification": null,
 "bench_tested": false,
 "markdown": "# HP Fortis x360 11 inch G5 Chromebook display assembly replacement\n\nSource: https://kaas.hpcloud.hp.com/pdf-public/pdf_9833028_en-US-1.pdf (printed pages 45–50). OEM-documented procedure; not bench-tested.\n\nFortis x360 11 inch G5 Chromebook™ display assembly replacement. HP prints this procedure on printed page 45 of its maintenance and service guide.\n\n## tools and parts\n\n- Nonconductive, nonmarking pry tool and Magnetic Phillips P2 drivers\n- Static-safe work surface\n- No spare part number for this component was found in the cached manual\n\n## preparation\n\nHP prints its tools list and its handling and electrostatic-discharge cautions on printed page 19. Its preparation for disassembly is on printed page 28: power the unit down through the operating system, unplug the power cord and detach every external device before opening it. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.\n\n## replacement\n\n1. Take out the four Phillips M2.5 × 4.5 screws that hold the display assembly to the computer. (printed page 45).\n2. Lift the tape that covers the display plug on the system board. The tape does not have to come off entirely. (printed page 45).\n3. Detach display cable from ZIF connector on the system board. (printed page 45).\n4. Lift the tape that covers the display camera plug on the system board. The tape does not have to come off entirely. (printed page 45).\n5. Detach cable from ZIF connector on the system board. (printed page 45).\n6. Take out Phillips M2.0 × 3.0 screw holds from bracket on WWAN module, and then remove the bracket. (printed page 45).\n7. Detach the antenna cables from the WWAN module. (printed page 46).\n8. Swing the display open to 90° (1), and then separate the display from the computer. (printed page 46).\n9. To remove display panel from the display assembly: (printed page 46).\n10. To remove hinges from the display rear cover: a. Take out the three Phillips M2.5 × 2.5 broad head screws from each hinge. b. Take out the rubber insert from each hinge cover. c. Take out the cables from under each hinge cover. (printed page 47).\n11. To remove camera module: a. Detach cable from ZIF connector on the camera module. (printed page 48).\n12. To remove camera cable, disconnect cable from ZIF connector on camera module. Peel cable off the inside of the display rear panel. (printed page 49).\n13. To remove touch control board, disconnect cables from two large ZIF connectors on board. Detach small cable from end of the board, and then use tool to release the board. (printed page 49).\n14. To remove sensor board, disconnect the cable from the board, and then use a tool to release the board. (printed page 50).\n15. To remove the WWAN antennas and cables: (printed page 50).\n",
 "outcome": "found",
 "data_revision": "93b6f8041cad",
 "license": "Free to use with attribution: credit \"Laptop Part Finder\" and link to https://laptoppartfinder.com (or the page you used). Please do not republish or mirror the dataset in bulk without permission.",
 "attribution": "Laptop Part Finder (https://laptoppartfinder.com)",
 "terms_url": "https://laptoppartfinder.com/terms/#data-license"
}