{
 "slug": "hp-fortis-x360-11-inch-g5-chromebook-touchpad-replacement-p31",
 "title": "How to do an HP Fortis x360 11 inch G5 Chromebook touchpad replacement",
 "model": "hp-fortis-x360-11-g5-chromebook",
 "model_name": "HP Fortis x360 11 inch G5 Chromebook",
 "component": "touchpad",
 "manufacturer": "HP",
 "url": "https://laptoppartfinder.com/guides/hp-fortis-x360-11-inch-g5-chromebook-touchpad-replacement-p31/",
 "api_url": "https://laptoppartfinder.com/api/guides/hp-fortis-x360-11-inch-g5-chromebook-touchpad-replacement-p31",
 "source_url": "https://kaas.hpcloud.hp.com/pdf-public/pdf_9833028_en-US-1.pdf",
 "source_title": "HP Maintenance and Service Guide",
 "pages": "printed pages 30–33",
 "service_classification": null,
 "bench_tested": false,
 "markdown": "# HP Fortis x360 11 inch G5 Chromebook touchpad replacement\n\nSource: https://kaas.hpcloud.hp.com/pdf-public/pdf_9833028_en-US-1.pdf (printed pages 30–33). OEM-documented procedure; not bench-tested.\n\nFortis x360 11 inch G5 Chromebook™ touchpad replacement. HP prints this procedure on printed page 31 of its maintenance and service guide, and the spare-part table for this part is on printed page 31.\n\n## tools and parts\n\n- Screwdrivers and a non-marking pry tool as HP lists for this procedure\n- Static-safe work surface\n- `N85025-001` - Touchpad, jet black. Source: printed page 31.\n- `N85026-001` - Touchpad, galactic blue. Source: printed page 31.\n- `N85027-001` - Touchpad cable (available in the Cable Kit). Source: printed page 31.\n- `N85029-001` - Touchpad bracket (available in the Bracket Kit). Source: printed page 31.\n\n## preparation\n\nSave your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.\n\n1. Take the bottom cover off (the Bottom cover section is on page 28). (printed page 30).\n\n## replacement\n\n2. Get the machine ready for taking apart (the Preparation for disassembly section is on page 28). (printed page 31).\n3. Take the battery out (the Battery section is on page 29). (printed page 31).\n4. Take the four Phillips M2.0 × 2.5 fasteners (1) from the touchpad bracket, and after that take the bracket (2). (printed page 32).\n5. Take the tape (1) from the touchpad. (printed page 32).\n6. Detach the lead from the ZIF connector (2) on the touchpad. (printed page 32).\n7. Lift the protective tape (3) that covers the fasteners at the top of the touchpad. (printed page 32).\n8. Take gray conductive tape (4) from touchpad. (printed page 32).\n9. Take the three Phillips M2.0 × 2.5 fasteners (5) from the touchpad. (printed page 32).\n10. Take the touchpad (6) from the machine. (printed page 32).\n11. When installing the touchpad as well as bracket, be sure which the rubber bumper is installed at the lower of the touchpad bracket inside the location shown in the following illustration. (printed page 33).\n\n",
 "outcome": "found",
 "data_revision": "93b6f8041cad",
 "license": "Free to use with attribution: credit \"Laptop Part Finder\" and link to https://laptoppartfinder.com (or the page you used). Please do not republish or mirror the dataset in bulk without permission.",
 "attribution": "Laptop Part Finder (https://laptoppartfinder.com)",
 "terms_url": "https://laptoppartfinder.com/terms/#data-license"
}