{
 "slug": "hp-probook-430-g4-keyboard-replacement-p42",
 "title": "How to do an HP ProBook 430 G4 keyboard replacement",
 "model": "hp-probook-430-g4",
 "model_name": "HP ProBook 430 G4",
 "component": "keyboard",
 "manufacturer": "HP",
 "url": "https://laptoppartfinder.com/guides/hp-probook-430-g4-keyboard-replacement-p42/",
 "api_url": "https://laptoppartfinder.com/api/guides/hp-probook-430-g4-keyboard-replacement-p42",
 "source_url": "https://h10032.www1.hp.com/ctg/Manual/c05271036.pdf",
 "source_title": "HP Maintenance and Service Guide",
 "pages": "printed pages 31–44",
 "service_classification": null,
 "bench_tested": false,
 "markdown": "# HP ProBook 430 G4 keyboard replacement\n\nSource: https://h10032.www1.hp.com/ctg/Manual/c05271036.pdf (printed pages 31–44). OEM-documented procedure; not bench-tested.\n\nHP ProBook 430 G4 Notebook PC keyboard replacement. HP prints this procedure on printed page 42 of its maintenance and service guide.\n\n## tools and parts\n\n- Screwdrivers and a non-marking pry tool as HP lists for this procedure\n- Static-safe work surface\n\n## preparation\n\nSave your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.\n\n1. Power the machine down. If you are unsure whether the machine is off or in Hibernation, turn the machine on, and after that shut it down through the operating system. (printed page 31).\n2. Place the machine in “Battery Safe mode” (the Battery Safe mode section is on page 30). (printed page 31).\n3. Detach every external device wired to the machine. (printed page 31).\n4. Cut the power by pulling the cord out of the wall outlet, and after that unplugging the AC adapter from the machine. (printed page 31).\n5. Take the main service door (the Service doors section is on page 31). (printed page 35).\n\n## replacement\n\n6. Take the 2 Phillips PM2.5×5.0 fasteners that hold the keyboard to the machine (1). (printed page 42).\n7. Seat a tool into the access hole inside the bottom of the machine (next to the hard drive bay) as well as push to disengage the keyboard out of the top cover (2). (printed page 43).\n8. Raise the top of the keyboard upward (1), and after that turn the keyboard until it rests at the palm rest (2). (printed page 43).\n9. Detach the keyboard lead by lifting the connector latch (1), and after that detach the keyboard lead from the main board (2). (printed page 43).\n10. If applicable, detach the backlight lead by lifting the connector latch (3), and after that detach the lead from the main board (4). (printed page 44).\n11. Take the keyboard (5). (printed page 44).\n12. Fit the replacement part by working back through the printed removal steps (printed page 44).\n\n",
 "outcome": "found",
 "data_revision": "93b6f8041cad",
 "license": "Free to use with attribution: credit \"Laptop Part Finder\" and link to https://laptoppartfinder.com (or the page you used). Please do not republish or mirror the dataset in bulk without permission.",
 "attribution": "Laptop Part Finder (https://laptoppartfinder.com)",
 "terms_url": "https://laptoppartfinder.com/terms/#data-license"
}