{
 "slug": "hp-probook-430-g4-usb-audio-board-replacement-p63",
 "title": "How to do an HP ProBook 430 G4 USB/audio board replacement",
 "model": "hp-probook-430-g4",
 "model_name": "HP ProBook 430 G4",
 "component": "USB/audio board",
 "manufacturer": "HP",
 "url": "https://laptoppartfinder.com/guides/hp-probook-430-g4-usb-audio-board-replacement-p63/",
 "api_url": "https://laptoppartfinder.com/api/guides/hp-probook-430-g4-usb-audio-board-replacement-p63",
 "source_url": "https://h10032.www1.hp.com/ctg/Manual/c05271036.pdf",
 "source_title": "HP Maintenance and Service Guide",
 "pages": "printed pages 31–64",
 "service_classification": null,
 "bench_tested": false,
 "markdown": "# HP ProBook 430 G4 USB/audio board replacement\n\nSource: https://h10032.www1.hp.com/ctg/Manual/c05271036.pdf (printed pages 31–64). OEM-documented procedure; not bench-tested.\n\nHP ProBook 430 G4 Notebook PC USB/audio board replacement. HP prints this procedure on printed page 63 of its maintenance and service guide, and the spare-part table for this part is on printed page 63.\n\n## tools and parts\n\n- Screwdrivers and a non-marking pry tool as HP lists for this procedure\n- Static-safe work surface\n- `905713-001` - USB/audio board. Source: printed page 63.\n- `905734-001` - USB/audio board cable (included in Cable Kit). Source: printed page 63.\n\n## preparation\n\nSave your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.\n\n1. Power the machine down. If you are unsure whether the machine is off or in Hibernation, turn the machine on, and after that shut it down through the operating system. (printed page 31).\n2. Place the machine upright on a flat surface. (printed page 61).\n\n## replacement\n\n3. Detach every external device wired to the machine. (printed page 63).\n4. Cut the power by pulling the cord out of the wall outlet, and after that unplugging the AC adapter from the machine. (printed page 63).\n5. Take the following parts out: a. Service door (the Service doors section is on page 31). b. Hard drive (the Hard drive section is on page 33) c. Keyboard (the Keyboard section is on page 42) d. Top cover (the Top cover section is on page 49) e. Battery (the Battery section is on page 61) (printed page 63).\n6. Detach the lead from the board (1). (printed page 63).\n7. Take the 2 Phillips PM2.5×5.0 fasteners (2) that hold the board to the machine. (printed page 63).\n8. Lift the board out of the machine (3). (printed page 63).\n9. If you need to replace the lead, note its routing path (4). (printed page 64).\n10. Fit the replacement part by working back through the printed removal steps (printed page 64).\n\n",
 "outcome": "found",
 "data_revision": "93b6f8041cad",
 "license": "Free to use with attribution: credit \"Laptop Part Finder\" and link to https://laptoppartfinder.com (or the page you used). Please do not republish or mirror the dataset in bulk without permission.",
 "attribution": "Laptop Part Finder (https://laptoppartfinder.com)",
 "terms_url": "https://laptoppartfinder.com/terms/#data-license"
}