{
 "slug": "hp-probook-440-14-inch-g11-notebook-display-assembly-replacement-p60",
 "title": "How to do an HP ProBook 440 G11 display assembly replacement",
 "model": "hp-probook-440-g11",
 "model_name": "HP ProBook 440 G11",
 "component": "display assembly",
 "manufacturer": "HP",
 "url": "https://laptoppartfinder.com/guides/hp-probook-440-14-inch-g11-notebook-display-assembly-replacement-p60/",
 "api_url": "https://laptoppartfinder.com/api/guides/hp-probook-440-14-inch-g11-notebook-display-assembly-replacement-p60",
 "source_url": "https://kaas.hpcloud.hp.com/pdf-public/pdf_10338598_en-US-1.pdf",
 "source_title": "HP Maintenance and Service Guide",
 "pages": "printed pages 60–66",
 "service_classification": null,
 "bench_tested": false,
 "markdown": "# HP ProBook 440 G11 display assembly replacement\n\nSource: https://kaas.hpcloud.hp.com/pdf-public/pdf_10338598_en-US-1.pdf (printed pages 60–66). OEM-documented procedure; not bench-tested.\n\nHP ProBook 440 14 inch G11 Notebook display assembly replacement. HP prints this procedure on printed page 60 of its maintenance and service guide.\n\n## Tools and parts\n\n- Screwdrivers and a non-marking pry tool as HP lists for this procedure\n- Static-safe work surface\n\n## Preparation\n\nSave your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.\n\n## Replacement\n\n1. (Select models only) Detach the antenna cables from the WWAN module. (printed page 60).\n2. (Choose models only) Detach the WWAN lead from the main board connector (2). (printed page 60).\n3. (Select models only) Take out the WWAN cable (printed page 60).\n4. Detach the antenna cables from the WLAN module. (printed page 60).\n5. Detach the display cable from carefully the system board ZIF connector. (printed page 60).\n6. Take out the display cable (printed page 61).\n7. Take out the six Phillips M2.5 × 4.0 screws that hold the display assembly to the computer. (printed page 61).\n8. Open the computer to approximately 170° (printed page 61).\n9. Separate the display assembly from the computer. (printed page 62).\n10. To remove the bezel: (printed page 62).\n11. To remove the display panel: (printed page 62).\n12. To remove an IR camera module: (printed page 64).\n13. To remove an FHD camera module: (printed page 64).\n14. To remove the hinges from the display enclosure: (printed page 65).\n15. To remove the display panel/camera lead on models with an IR camera: (printed page 65).\n16. To remove the display panel/camera lead on models with an FHD camera: (printed page 66).\n17. To remove the wireless antennas and cables: (printed page 66).\n",
 "outcome": "found",
 "data_revision": "93b6f8041cad",
 "license": "Free to use with attribution: credit \"Laptop Part Finder\" and link to https://laptoppartfinder.com (or the page you used). Please do not republish or mirror the dataset in bulk without permission.",
 "attribution": "Laptop Part Finder (https://laptoppartfinder.com)",
 "terms_url": "https://laptoppartfinder.com/terms/#data-license"
}