{
 "slug": "hp-probook-445-14-inch-g9-speaker-replacement-p58",
 "title": "How to do an HP ProBook 445 G9 speaker replacement",
 "model": "hp-probook-445-g9",
 "model_name": "HP ProBook 445 G9",
 "component": "speaker",
 "manufacturer": "HP",
 "url": "https://laptoppartfinder.com/guides/hp-probook-445-14-inch-g9-speaker-replacement-p58/",
 "api_url": "https://laptoppartfinder.com/api/guides/hp-probook-445-14-inch-g9-speaker-replacement-p58",
 "source_url": "https://kaas.hpcloud.hp.com/pdf-public/pdf_12000652_en-US-1.pdf",
 "source_title": "HP Maintenance and Service Guide",
 "pages": "printed pages 41–58",
 "service_classification": null,
 "bench_tested": false,
 "markdown": "# HP ProBook 445 G9 speaker replacement\n\nSource: https://kaas.hpcloud.hp.com/pdf-public/pdf_12000652_en-US-1.pdf (printed pages 41–58). OEM-documented procedure; not bench-tested.\n\nHP ProBook 445 14 inch G9 Notebook PC speaker replacement. HP prints this procedure on printed page 58 of its maintenance and service guide, and the spare-part table for this part is on printed page 20.\n\n## Tools and parts\n\n- Screwdrivers and a non-marking pry tool as HP lists for this procedure\n- Static-safe work surface\n- `M21400-001` - Speaker. Source: printed page 58.\n\n## Preparation\n\nSave your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.\n\n## Replacement\n\n1. Get the machine ready for taking apart (the Preparation for disassembly section is on page 38). (printed page 41).\n2. Take the bottom cover off (the Bottom cover section is on page 38). (printed page 41).\n3. Take the battery out (the Battery section is on page 48). (printed page 52).\n4. Take the main board (the main board section is on page 55). (printed page 58).\n5. Undo the Phillips M2.0 × 2.0 fastener (1) that holds the speaker to the machine. (printed page 58).\n6. Lift the speaker up and out of the machine (2). While fitting the speaker, check which the rubber cap inside installed at the right end of the speaker (3). (printed page 58).\n7. Fit the replacement part by working back through the printed removal steps (printed page 58).\n",
 "outcome": "found",
 "data_revision": "93b6f8041cad",
 "license": "Free to use with attribution: credit \"Laptop Part Finder\" and link to https://laptoppartfinder.com (or the page you used). Please do not republish or mirror the dataset in bulk without permission.",
 "attribution": "Laptop Part Finder (https://laptoppartfinder.com)",
 "terms_url": "https://laptoppartfinder.com/terms/#data-license"
}