{
 "slug": "hp-probook-455-g3-card-reader-board-replacement-p60",
 "title": "How to do an HP ProBook 455 G3 card reader board replacement",
 "model": "hp-probook-455-g3",
 "model_name": "HP ProBook 455 G3",
 "component": "card reader board",
 "manufacturer": "HP",
 "url": "https://laptoppartfinder.com/guides/hp-probook-455-g3-card-reader-board-replacement-p60/",
 "api_url": "https://laptoppartfinder.com/api/guides/hp-probook-455-g3-card-reader-board-replacement-p60",
 "source_url": "https://h10032.www1.hp.com/ctg/Manual/c04825528.pdf",
 "source_title": "HP Maintenance and Service Guide",
 "pages": "printed pages 32–61",
 "service_classification": null,
 "bench_tested": false,
 "markdown": "# HP ProBook 455 G3 card reader board replacement\n\nSource: https://h10032.www1.hp.com/ctg/Manual/c04825528.pdf (printed pages 32–61). OEM-documented procedure; not bench-tested.\n\nHP ProBook 455 G3 Notebook PC card reader board replacement. HP prints this procedure on printed page 60 of its maintenance and service guide, and the spare-part table for this part is on printed page 60.\n\n## tools and parts\n\n- Screwdrivers and a non-marking pry tool as HP lists for this procedure\n- Static-safe work surface\n- `828416-001` - Card reader board. Source: printed page 60.\n- `828418-001` - Card reader board cable (included in Cable Kit). Source: printed page 60.\n\n## preparation\n\nSave your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.\n\n1. Power the machine down. If you are unsure whether the machine is off or in Hibernation, turn the machine on, and after that shut it down through the operating system. (printed page 32).\n2. Detach every external device wired to the machine. (printed page 32).\n3. Cut the power by pulling the cord out of the wall outlet, and after that unplugging the AC adapter from the machine. (printed page 32).\n4. Take the battery out (the Battery section is on page 32). (printed page 33).\n5. Place the top cover upside-down. (printed page 52).\n\n## replacement\n\n6. Take the following parts out: a. Optical drive (the Optical drive section is on page 35) b. Service doors (the Service doors section is on page 33). c. Optical drive (the Optical drive section is on page 35) d. Hard drive (the Hard drive section is on page 37) e. Keyboard (the Keyboard section is on page 43) f. Top cover (the Top cover section is on page 48) (printed page 60).\n7. Undo the Phillips PM2.5×3.0 fastener (1) that holds the board to the machine, and lift the lead side of the board. (printed page 61).\n8. Turn the board upside down (1), and after that detach the lead from the board (2). (printed page 61).\n9. Fit the replacement part by working back through the printed removal steps (printed page 61).\n\n",
 "outcome": "found",
 "data_revision": "93b6f8041cad",
 "license": "Free to use with attribution: credit \"Laptop Part Finder\" and link to https://laptoppartfinder.com (or the page you used). Please do not republish or mirror the dataset in bulk without permission.",
 "attribution": "Laptop Part Finder (https://laptoppartfinder.com)",
 "terms_url": "https://laptoppartfinder.com/terms/#data-license"
}