{
 "slug": "hp-probook-470-g3-display-assembly-replacement-p77",
 "title": "How to do an HP ProBook 470 G3 display assembly replacement",
 "model": "hp-probook-470-g3",
 "model_name": "HP ProBook 470 G3",
 "component": "display assembly",
 "manufacturer": "HP",
 "url": "https://laptoppartfinder.com/guides/hp-probook-470-g3-display-assembly-replacement-p77/",
 "api_url": "https://laptoppartfinder.com/api/guides/hp-probook-470-g3-display-assembly-replacement-p77",
 "source_url": "https://h10032.www1.hp.com/ctg/Manual/c04825507.pdf",
 "source_title": "HP Maintenance and Service Guide",
 "pages": "printed pages 77–82",
 "service_classification": null,
 "bench_tested": false,
 "markdown": "# HP ProBook 470 G3 display assembly replacement\n\nSource: https://h10032.www1.hp.com/ctg/Manual/c04825507.pdf (printed pages 77–82). OEM-documented procedure; not bench-tested.\n\nHP ProBook 470 G3 Notebook PC display assembly replacement. HP prints this procedure on printed page 77 of its maintenance and service guide.\n\n## Tools and parts\n\n- Screwdrivers and a non-marking pry tool as HP lists for this procedure\n- Static-safe work surface\n\n## Preparation\n\nSave your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.\n\n## Replacement\n\n1. Position the computer upright and open. (printed page 77).\n2. Detach the display cable from the system board (1). (printed page 77).\n3. Pull the WLAN antennas across the hole in the computer (2). (printed page 77).\n4. Take out the 5 Phillips PM2.5×5.0 screws from the display hinges. (printed page 77).\n5. Lift the display assembly straight up (printed page 78).\n6. To remove the display bezel (printed page 78).\n7. Flex the top of the bezel (printed page 78).\n8. Take out the display bezel (6). (printed page 79).\n9. If it is needed to substitute the webcam or microphone unit, disconnect the cable from the module (printed page 79).\n10. If it is necessary to take the screen panel from the enclosure, take the 4 Phillips PM2.0×3.0 (printed page 80).\n11. Lift the display cable connector clip (1) (printed page 80).\n12. Take out the display panel from the enclosure. (printed page 80).\n13. If it is necessary to replace the screen hinges, take the 2 Phillips PM2.0×3.0 fasteners at the top (1) and (printed page 81).\n14. Take out the display hinges from the display enclosure (3). (printed page 81).\n15. If it is necessary to replace the screen/webcam lead, lift the webcam lead to disengage the adhesive (printed page 81).\n16. Raise the tabs to disengage the adhesive on the lead near the bottom of the screen enclosure (3), and (printed page 82).\n17. Fit the replacement part by working back through the printed removal steps (printed page 82).\n",
 "outcome": "found",
 "data_revision": "93b6f8041cad",
 "license": "Free to use with attribution: credit \"Laptop Part Finder\" and link to https://laptoppartfinder.com (or the page you used). Please do not republish or mirror the dataset in bulk without permission.",
 "attribution": "Laptop Part Finder (https://laptoppartfinder.com)",
 "terms_url": "https://laptoppartfinder.com/terms/#data-license"
}