{
 "slug": "hp-probook-650-g2-display-assembly-components-replacement-p83",
 "title": "How to do an HP ProBook 650 G2 display assembly components replacement",
 "model": "hp-probook-650-g2",
 "model_name": "HP ProBook 650 G2",
 "component": "display assembly components",
 "manufacturer": "HP",
 "url": "https://laptoppartfinder.com/guides/hp-probook-650-g2-display-assembly-components-replacement-p83/",
 "api_url": "https://laptoppartfinder.com/api/guides/hp-probook-650-g2-display-assembly-components-replacement-p83",
 "source_url": "https://h10032.www1.hp.com/ctg/Manual/c04919621.pdf",
 "source_title": "HP Maintenance and Service Guide",
 "pages": "printed pages 83–86",
 "service_classification": null,
 "bench_tested": false,
 "markdown": "# HP ProBook 650 G2 display assembly components replacement\n\nSource: https://h10032.www1.hp.com/ctg/Manual/c04919621.pdf (printed pages 83–86). OEM-documented procedure; not bench-tested.\n\nHP ProBook 650 G2 Notebook PC display assembly components replacement. HP prints this procedure on printed page 83 of its maintenance and service guide.\n\n## tools and parts\n\n- Flat-bladed drivers, Magnetic drivers and Phillips P0 and P1 drivers\n- Static-safe work surface\n- No spare part number for this component was found in the cached manual\n\n## preparation\n\nHP prints its tools list and its handling and electrostatic-discharge cautions on printed page 32. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.\n\n## replacement\n\n1. Position computer upright, with the front toward you. (printed page 83).\n2. Open the computer as far as possible. (printed page 83).\n3. If it is necessary to replace display bezel: a. Close computer, position it so you can access bottom of display, and then open the computer slightly. b. (printed page 83).\n4. If it is necessary to replace display panel: a. Take out the four M2x3L P1 screws that hold the display panel to the display enclosure. (printed page 83).\n5. If it is necessary to replace hinge brackets, remove M2.5x2.5L P1 screws from each side, and then remove the hinge brackets (2). (printed page 85).\n6. If it is necessary to replace WLAN antenna cables, remove 3 screws from each side, and then remove the WLAN antenna cables (2). (printed page 85).\n7. If it is necessary to replace WWAN antenna cables (select products only, remove 3 screws from each side, and then remove the WWAN antenna cables (2). (printed page 86).\n8. If it is necessary to replace webcam: a. Detach the cable from the webcam. b. Detach the webcam from the display enclosure. (printed page 86).\n9. If it is necessary to replace microphone board: a. Detach the cable from the microphone board. (printed page 86).\n",
 "outcome": "found",
 "data_revision": "93b6f8041cad",
 "license": "Free to use with attribution: credit \"Laptop Part Finder\" and link to https://laptoppartfinder.com (or the page you used). Please do not republish or mirror the dataset in bulk without permission.",
 "attribution": "Laptop Part Finder (https://laptoppartfinder.com)",
 "terms_url": "https://laptoppartfinder.com/terms/#data-license"
}