{
 "slug": "hp-zbook-studio-g4-thermal-module-replacement-p38",
 "title": "How to do an HP ZBook Studio G4 thermal module replacement",
 "model": "hp-zbook-studio-g4",
 "model_name": "HP ZBook Studio G4",
 "component": "thermal module",
 "manufacturer": "HP",
 "url": "https://laptoppartfinder.com/guides/hp-zbook-studio-g4-thermal-module-replacement-p38/",
 "api_url": "https://laptoppartfinder.com/api/guides/hp-zbook-studio-g4-thermal-module-replacement-p38",
 "source_url": "https://h10032.www1.hp.com/ctg/Manual/c05481588.pdf",
 "source_title": "HP Maintenance and Service Guide",
 "pages": "printed pages 38–40",
 "service_classification": null,
 "bench_tested": false,
 "markdown": "# HP ZBook Studio G4 thermal module replacement\n\nSource: https://h10032.www1.hp.com/ctg/Manual/c05481588.pdf (printed pages 38–40). OEM-documented procedure; not bench-tested.\n\nHP ZBook Studio G4 Mobile Workstation thermal module replacement. HP prints this procedure on printed page 38 of its maintenance and service guide, and the spare-part table for this part is on printed page 38.\n\n## tools and parts\n\n- Flat-bladed screw driver, Magnetic screw driver and Phillips P0 and P1 screw drivers\n- Static-safe work surface\n- `922945-001` - Thermal module for use only with models with discrete graphics memory. Source: printed page 38.\n- `922946-001` - Thermal module for use only with models with UMA graphics memory. Source: printed page 38.\n\n## preparation\n\nHP prints its tools list and its handling and electrostatic-discharge cautions on printed page 24. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.\n\n## replacement\n\n1. Back off six captive screws on discrete models, or four on UMA models, in middle of heat sink (between the fans) in the order marked there, and the two captive screws on each fan. (printed page 38).\n2. Detach the cable for each fan off the system board (3). (printed page 38).\n3. Lift the antennas off the routing path atop the left fan and the display connector off the routing path atop the right fan (5). (printed page 38).\n4. Take out the fan/heat sink assembly (6). (printed page 39).\n5. Put the thermal module back by repeating the printed removal moves in the opposite order (printed page 40).\n",
 "outcome": "found",
 "data_revision": "93b6f8041cad",
 "license": "Free to use with attribution: credit \"Laptop Part Finder\" and link to https://laptoppartfinder.com (or the page you used). Please do not republish or mirror the dataset in bulk without permission.",
 "attribution": "Laptop Part Finder (https://laptoppartfinder.com)",
 "terms_url": "https://laptoppartfinder.com/terms/#data-license"
}