Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP Chromebook 13 G1. Confirm the exact model on the service label before starting.
HP Chromebook 13 G1 computer feet replacement. HP prints this procedure on printed page 19 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Close the computer and set it upside down, front toward you. (printed page 19).
- Work a blunt tool into the gap at one end of the rubber feet, under the base enclosure. (printed page 19).
- Pull the rubber feet up lightly and quickly. (printed page 19).
- Take the rubber feet off (3). (printed page 20).
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-chromebook-13-g1-computer-feet-replacement