Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP Chromebook Enterprise x360 14E G1. Confirm the exact model on the service label before starting.
HP Chromebook Enterprise x360 14E G1 USB bracket replacement. HP prints this procedure on printed page 36 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
L36909-001- USB bracket. Source: printed page 36.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Take the Phillips M2.0×4.0 fastener (1) that holds the USB bracket to the I/O board. (printed page 36).
- Take the USB bracket (2). (printed page 36).
- Fit the replacement part by working back through the printed removal steps (printed page 36).
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-chromebook-enterprise-x360-14e-g1-usb-bracket-replacement-p36