Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP Elite c640 14 inch G3 Chromebook. Confirm the exact model on the service label before starting.
HP Elite c640 14 inch G3 Chromebook solid-state drive replacement. HP prints this procedure on printed page 31 of its maintenance and service guide, and the spare-part table for this part is on printed page 31.
tools and parts
- Tweezers
- Nonconductive, nonmarking pry tool
- Magnetic Phillips P1 screwdriver
N13691-001- 512 GB solid-state drive. Source: printed page 31.N13690-001- 256 GB solid-state drive. Source: printed page 31.N13689-001- 128 GB solid-state drive. Source: printed page 31.N12921-001- Solid-state drive bracket (available in the Bracket Kit). Source: printed page 31.
preparation
Save your work, shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
- Get the machine ready for teardown (that section sits on page 28).
- Take the bottom cover off (that section sits on page 28).
- Unplug the battery lead from the main board (the Battery section sits on page 30).
replacement
- Peel the vinyl cover away from the drive (1).
- Undo the Phillips M2.0 × 2.0 screw (2) that holds the drive down.
- Draw the drive out of its socket (3).
Parts this procedure uses
- HP Bottom cover, 512 GB N13691-001 (N13691-001)
- HP Fingerprint Reader N12921-001 (N12921-001)
Part numbers in our catalog
- HP SSD N13689-001 (N13689-001)
- HP SSD N13690-001 (N13690-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elite-c640-14-inch-g3-chromebook-solid-state-drive-replacement