Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook 1040 G3. Confirm the exact model on the service label before starting.
HP EliteBook 1040 G3 touchpad replacement. HP prints this procedure on printed page 44 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
844394-001- TouchPad. Source: printed page 44.844396-001- NOTE: The TouchPad cable is available in the Cable Kit, spare part number. Source: printed page 44.857632-001- available using spare part number. Source: printed page 44.
Preparation
Save your work, shut the computer down through the operating system, unplug AC power and every external device, and work on a grounded, static-safe surface.
Replacement
- Shut the machine down, pull the mains lead out and unplug every peripheral. (printed page 44).
- Take the bottom cover off so the inside of the chassis is reachable. (printed page 44).
- Take the battery off the board before you touch the part you came for. (printed page 44).
Parts this procedure uses
- HP Cable Kit containing the function board cable 844396-001 (844396-001)
- HP NFC antenna, not shown in the parts view 857632-001 (857632-001)
Part numbers in our catalog
- HP TouchPad module assembly 844394-001 (844394-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-1040-g3-touchpad-replacement-p44