Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook 840 G10. Confirm the exact model on the service label before starting.
HP EliteBook 840 G10 m.2 solid-state drive replacement. HP prints this procedure on printed page 48 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
M52027-001- Solid-state drive 2 TB, PCIe-4×4, ZTurbo, TLC. Source: printed page 48.N53566-001- Solid-state drive shield (included in the Bracket Kit). Source: printed page 48.
Preparation
Save your work, shut the computer down through the operating system, unplug AC power and every external device, and work on a grounded, static-safe surface.
Replacement
- Prepare the computer for disassembly and open the bottom cover so the storage device is reachable. (printed page 48).
- Disconnect the storage cable from the system board and undo the fastener that holds the drive in place. (printed page 48).
- Slide the drive out of its connector and keep the storage cable with the system board. (printed page 48).
Parts this procedure uses
- HP Fingerprint reader bracket N53566-001 (N53566-001)
Part numbers in our catalog
- HP SSD M17436-001 (M17436-001)
- HP SSD M16560-001 (M16560-001)
- HP SSD M52027-001 (M52027-001)
- HP SSD N23415-001 (N23415-001)
- HP SSD M52031-001 (M52031-001)
- HP SSD N35225-001 (N35225-001)
- HP SSD N45477-001 (N45477-001)
- HP Solid-state drive, 512 GB, PCIe-4×4 N04490-001 (N04490-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-840-g10-m-2-solid-state-drive-replacement-p48