Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook 840 G2. Confirm the exact model on the service label before starting.
HP EliteBook 840 G2 Notebook PC solid-state drive replacement. HP prints this procedure on printed page 62 of its maintenance and service guide, and the spare-part table for this part is on printed page 62.
tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
803386-001- 512-GB, SATA-3 solid-state drive for use on all computer models. Source: printed page 62.821149-001- 512-GB, SATA-3, SED, solid-state drive supporting Opal 2 for use on all computer models. Source: printed page 62.834734-001- 512-GB, SATA-3, solid-state drive supporting TLC for use only on HP EliteBook 840 G2 Notebook PC and HP EliteBook 740 G2 Notebook PC computer models. Source: printed page 62.824647-001- 512-GB, 2260.M2, ZTurbo, PCIe2×2 solid-state drive for use only on HP ZBook 14 G2 Mobile Workstation computer models. Source: printed page 62.803390-001- 256-GB, SATA-3 solid-state drive for use only on HP ZBook 14 G2 Mobile Workstation computer models. Source: printed page 62.830146-001- 256-GB, SATA-3, locked solid-state drive supporting Opal 2 for use only on HP EliteBook 840 G2 Notebook PC and HP EliteBook 740 G2 Notebook PC computer models. Source: printed page 62.831106-001- 256-GB, SATA-3, SED, locked solid-state drive supporting Opal 2 for use only on HP EliteBook 840 G2 Notebook PC and HP EliteBook 740 G2 Notebook PC computer models. Source: printed page 62.834421-001- 256-GB, SATA-3, SED, locked, Samsung SM841 solid-state drive supporting Opal 2 for use only on HP EliteBook 840 G2 Notebook PC and HP EliteBook 740 G2 Notebook PC computer models. Source: printed page 62.803389-001- 256-GB, SATA-3 solid-state drive supporting TLC for use on all computer models. Source: printed page 62.803387-001- 256-GB, SATA-3, SED, solid-state drive supporting Opal 2 for use on all computer models. Source: printed page 62.803381-001- 256-GB, 2260.M2, PCIe-2×2 solid-state drive for use on all computer models. Source: printed page 62.803385-001- 240-GB, SATA-3 solid-state drive for use on all computer models. Source: printed page 62.803384-001- 180-GB, SATA-3, SED, solid-state drive supporting Opal 2 for use on all computer models. Source: printed page 62.803383-001- 180-GB, SATA-3 solid-state drive for use on all computer models. Source: printed page 62.803382-001- 128-GB, SATA-3 solid-state drive for use on all computer models. Source: printed page 62.803388-001- 128-GB, SATA-3 solid-state drive supporting TLC for use on all computer models. Source: printed page 62.835499-001- 128-GB, SATA-3, locked, SanDisk EC0 solid-state drive supporting MLC for use only on HP EliteBook 840 G2 Notebook PC and HP EliteBook 740 G2 Notebook PC computer models. Source: printed page 62.815846-001- 128-GB, 2260.M2, PCIe-2×2 solid-state drive for use only on HP ZBook 14 G2 Mobile Workstation computer models. Source: printed page 62.803391-001- 32-GB, M2, SATA-3 solid-state drive for use only on HP EliteBook 840 G2 Notebook PC and HP EliteBook 740 G2 Notebook PC computer models. Source: printed page 62.
preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
- Power the machine down. If you cannot tell whether the machine is off or in Hibernation, turn the machine on, and after that shut it down through the operating system. (printed page 58).
- Cut the power from the machine by unplugging the power cord from the machine. (printed page 58).
- Detach every external device from the machine. (printed page 58).
- Take the service cover off (the Service cover section is on page 57). (printed page 59).
- Take the battery out (the Battery section is on page 59). (printed page 60).
replacement
- Take the Phillips PM2.0×3.0 fastener (1) that holds the solid-state drive to the main board. (The solid-state drive tilts up.) (printed page 63).
- Take the solid-state drive (3) by drawing the drive away out of the slot at an angle. (printed page 63).
- Fit the replacement part by working back through the printed removal steps (printed page 63).
Part numbers in our catalog
- HP Solid-state drive, 512-GB SATA-3 803386-001 (803386-001)
- HP Solid-state drive, 512-GB SATA-3 SED Opal 2 821149-001 (821149-001)
- HP Solid-state drive, 512-GB SATA-3 TLC 834734-001 (834734-001)
- HP Solid-state drive, 256-GB SATA-3 locked Opal 2 830146-001 (830146-001)
- HP Solid-state drive, 256-GB SATA-3 SED locked Opal 2 831106-001 (831106-001)
- HP Solid-state drive, 256-GB SATA-3 SED Samsung SM841 834421-001 (834421-001)
- HP Solid-state drive, 256-GB SATA-3 TLC 803389-001 (803389-001)
- HP Solid-state drive, 256-GB SATA-3 SED Opal 2 803387-001 (803387-001)
- HP Solid-state drive, 256-GB PCIe 2x2 M2 803381-001 (803381-001)
- HP Solid-state drive, 240-GB SATA-3 803385-001 (803385-001)
- HP Solid-state drive, 180-GB SATA-3 SED Opal 2 803384-001 (803384-001)
- HP Solid-state drive, 180-GB SATA-3 803383-001 (803383-001)
- HP Solid-state drive, 128-GB SATA-3 803382-001 (803382-001)
- HP Solid-state drive, 128-GB SATA-3 TLC 803388-001 (803388-001)
- HP Solid-state drive, 128-GB SATA-3 locked SanDisk EC0 835499-001 (835499-001)
- HP Solid-state drive, 32-GB M2 SATA-3 803391-001 (803391-001)
- HP Solid-state drive, 512-GB ZTurbo PCIe 2x2 824647-001 (824647-001)
- HP Solid-state drive, 256-GB SATA-3 803390-001 (803390-001)
- HP Solid-state drive, 128-GB PCIe 2x2 M2 815846-001 (815846-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-840-g2-solid-state-drive-replacement-p62