Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook 840 G3. Confirm the exact model on the service label before starting.
HP EliteBook 840 G3 Notebook PC nfc module replacement. HP prints this procedure on printed page 68 of its maintenance and service guide, and the spare-part table for this part is on printed page 68.
tools and parts
- Phillips P0 drivers
- Static-safe work surface
821666-001- NFC (Near Field Communication) module. Source: printed page 68.
preparation
HP prints its tools list and its handling and electrostatic-discharge cautions on printed page 30. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.
replacement
- Detach the system board cable and the NFC antenna from the NFC module. (printed page 68).
- Pry NFC module from smart card reader, and lift it from the computer (3). (printed page 68).
- Put the nfc module back by repeating the printed removal moves in the opposite order (printed page 68).
Parts this procedure uses
- HP NFC module 821666-001 (821666-001)
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-840-g3-nfc-module-replacement-p68