Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook 840 G8. Confirm the exact model on the service label before starting.
HP EliteBook 840 G8 usb board replacement. HP prints this procedure on printed page 49 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
M36398-001- USB board. Source: printed page 49.M07101-001- USB board cables (included in Cable Kit). Source: printed page 49.M08556-001- USB board USB bracket (included in Bracket Kit). Source: printed page 49.
Preparation
Save your work, shut the computer down through the operating system, unplug AC power and every external device, and work on a grounded, static-safe surface.
Replacement
- Prepare the computer for disassembly and open the bottom cover so the board is reachable. (printed page 49).
- Disconnect the board cables from the system board and release them from their routing clips. (printed page 49).
- Undo the fasteners that hold the board in place and lift it out of the chassis. (printed page 49).
Parts this procedure uses
- HP cable M07101-001 (M07101-001)
- HP Solid-state drive cover and memory cover, both supplied in t M08556-001 (M08556-001)
Part numbers in our catalog
- HP USB board M36398-001 (M36398-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-840-g8-usb-board-replacement-p49