Source: steps rewritten in our own words (no more than 8 words in a row copied; part numbers, screw sizes and warnings kept as printed) from HP's Maintenance and Service Guide (PDF, printed pages 71). Not bench-tested. We have not performed this repair; keep HP's manual open for its illustrations. Scope restrictions below are part of the guide: do not apply it to other models, generations or configurations. Service manuals are written for trained technicians; work at your own risk.
Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook 845 G9. Confirm the exact model on the service label before starting.
HP EliteBook 845 G9 nfc module replacement. HP prints this procedure on printed page 71 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
M08706-001- NFC module. Source: printed page 71.
Preparation
Save your work, shut the computer down through the operating system, unplug AC power and every external device, and work on a grounded, static-safe surface.
Replacement
- Prepare the computer for disassembly and open the bottom cover so the module is reachable. (printed page 71).
- Disconnect the module connector and release any cables that are routed over the module. (printed page 71).
- Undo the retaining fasteners and lift the module out of the chassis. (printed page 71).
Parts this procedure uses
- HP NFC module M08706-001 (M08706-001)
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-845-g9-nfc-module-replacement-p71