HP Fortis G1i 14 inch Chromebook display assembly replacement

Step-by-step HP Fortis G1i 14 inch Chromebook display assembly replacement rewritten in our own words from HP's Maintenance and Service Guide, with page citations.

Part you needN83264-001HP 14-inch display panel N83264-001 for the HP Fortis G1i 14 inch Chromebook
View part & buy links
On this page
  1. Applies to
  2. Tools and parts
  3. Preparation
  4. Replacement
  5. Part numbers in our catalog
  6. Manufacturer manual
Source: steps rewritten in our own words (no more than 8 words in a row copied; part numbers, screw sizes and warnings kept as printed) from HP's Maintenance and Service Guide (PDF, printed pages 54–60). Not bench-tested. We have not performed this repair; keep HP's manual open for its illustrations. Scope restrictions below are part of the guide: do not apply it to other models, generations or configurations. Service manuals are written for trained technicians; work at your own risk.

Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.

Applies to

HP Fortis G1i 14 inch Chromebook. Confirm the exact model on the service label before starting.

HP Fortis G1i 14 inch Chromebook display assembly replacement. HP prints this procedure on printed page 54 of its maintenance and service guide.

Tools and parts

  • Screwdrivers and a non-marking pry tool as HP lists for this procedure
  • Static-safe work surface

Preparation

Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.

Replacement

  1. Take the four Phillips M2.5 × 5.0 fasteners (1) that hold the screen assembly to the machine. (printed page 54).
  2. Lift the tape (2) that covers the screen connector on the main board, and after that detach the screen lead (3) from the ZIF connector on the main board. You do not have the completely take the tape from the connector. (printed page 54).
  3. Open the screen to 90° (1), and after that split the screen (2) from the machine. (printed page 54).
  4. To take the screen panel from the screen assembly: (printed page 54).
  5. To take the camera module: (printed page 57).
  6. To take the hinges from the screen rear cover: (printed page 57).
  7. Take the two Phillips M2.0 × 3.0 fasteners (1) from the top display bracket, and after that take the bracket (2) from the screen back cover. (printed page 58).
  8. To take the camera lead, detach the lead out of the ZIF connector (1) at the camera module. Peel the lead (2) off the inside of the screen rear cover, and after that take the lead out of the clips (3) along the lower right of the screen rear cover. (printed page 58).
  9. To take the screen lead, take the lead out of the clips (1) along the bottom of the screen rear cover. Peel the flat part of the lead (2) off the inside of the screen rear cover, and after that take the lead out of the clip (3) at the bottom of the screen rear cover. (printed page 59).
  10. To take the WLAN antennas and leads, free the leads from the tape (1) on the screen rear cover, and after that peel the WLAN antennas (2) off the cover. (printed page 59).
  11. To take the WWAN antennas and leads, free the leads from the clips (1) built into the screen back cover, and after that peel the antennas (2) off the cover. (printed page 60).

Part numbers in our catalog

Check each part page for its source and variant notes before ordering.

Manufacturer manual

HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-fortis-g1i-14-inch-chromebook-display-assembly-replacement-p54

Key facts

HP document part number
P27547-001
Model
HP Fortis G1i 14 inch Chromebook
Release year
2025
Screen size
14"
Printed pages
54–60

Related