Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP ProBook 445 G7. Confirm the exact model on the service label before starting.
HP ProBook 445 G7 Notebook PC memory module replacement. HP prints this procedure on printed page 34 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
L67710-002- Memory module, DDR4-3200, 16 GB. Source: printed page 34.L46598-002- Memory module, DDR4-3200, 8 GB. Source: printed page 34.L83673-002- Memory module, DDR4-3200, 4 GB. Source: printed page 34.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Lift the protective tape from on upper of the memory modules (1). (printed page 34).
- Spread the retaining tabs on each side of the memory card slot to release the memory module. (printed page 34).
- Take out the memory module by pulling the module away off the slot at an angle. (printed page 34).
- Fit the replacement part by working back through the printed removal steps (printed page 34).
Part numbers in our catalog
- HP 16 GB DDR4-3200 memory module L67710-002 (L67710-002)
- HP Memory L46598-002 (L46598-002)
- HP Memory module, DDR4-3200, 4 GB L83673-002 (L83673-002)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-probook-445-g7-memory-module-replacement-p34