HP ProBook 455 G7 system board replacement

Step-by-step HP ProBook 455 G7 system board replacement rewritten in our own words from HP's Maintenance and Service Guide, with page citations.

Part you needM09523-xx1HP System board with Ryzen 7 PRO 4750U M09523-xx1 for the HP ProBook 455 G7
View part & buy links
On this page
  1. Applies to
  2. tools and parts
  3. preparation
  4. replacement
  5. Part numbers in our catalog
  6. Manufacturer manual
Source: steps rewritten in our own words (no more than 8 words in a row copied; part numbers, screw sizes and warnings kept as printed) from HP's Maintenance and Service Guide (PDF, printed pages 33–56). Not bench-tested. We have not performed this repair; keep HP's manual open for its illustrations. Scope restrictions below are part of the guide: do not apply it to other models, generations or configurations. Service manuals are written for trained technicians; work at your own risk.

Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.

Applies to

HP ProBook 455 G7. Confirm the exact model on the service label before starting.

HP ProBook 455 G7 Notebook PC system board replacement. HP prints the spare part table for this procedure on printed page 54.

tools and parts

  • Tweezers, a pry tool that neither conducts nor marks and a magnetic Phillips P1 driver
  • Static-safe work surface

preparation

HP prints its tools list and its handling and electrostatic-discharge cautions on printed page 27. Its preparation for disassembly is on printed page 32: power the unit down through the operating system, unplug the power cord and detach every external device before opening it. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.

  1. Get the computer ready for disassembly (Preparation for disassembly on page 32). (printed page 33).
  2. Place the computer in cell Safe mode (Battery Safe mode on page 32). (printed page 33).

replacement

  1. Take out the following components: (printed page 54).
  2. Detach the following cables from the system board: (printed page 54).
  3. Take out the four Phillips M2.0 × 4.0 screws that hold the system board to the computer. (printed page 55).
  4. Take out the three Phillips M2.0 × 2.5 screws that hold the system board to the computer. (printed page 55).
  5. Take out the broadhead Phillips M2.5 × 2.5 screw that holds the system board to the computer. (printed page 55).
  6. Lift the bracket off the USB-Type C port (4). (printed page 56).
  7. Turn the right side of the main board upward (1). (printed page 56).
  8. Pull the main board away from the connectors at the side of the chassis to lift it out from the machine (2). (printed page 56).
  9. Install the system board by working back through the printed removal steps (printed page 56).

Part numbers in our catalog

Check each part page for its source and variant notes before ordering.

Manufacturer manual

HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-probook-455-g7-system-board-replacement-p54

Key facts

HP document part number
L92358-001
Model
HP ProBook 455 G7
Release year
2020
Screen size
15.6"
Printed pages
33–56

Related