Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP ProBook 650 G1. Confirm the exact model on the service label before starting.
HP ProBook 650 G1 Notebook PC speakers replacement. HP prints this procedure on printed page 95 of its maintenance and service guide.
tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
738404-001- Description Speakers (includes cable). Source: printed page 95.
preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
replacement
- Detach the speaker cables and from the system board. (printed page 95).
- Take out the two Phillips PM2.0×3.0 screws and that hold the speakers to the base enclosure. (printed page 95).
- Take out the speakers and and cables. (printed page 96).
- Put the speakers back by repeating the printed removal moves in the opposite order (printed page 96).
Part numbers in our catalog
- HP speaker kit 738404-001 (738404-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-probook-650-g1-speakers-replacement