Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP Chromebook x360 11 G4 Education Edition. Confirm the exact model on the service label before starting.
HP Chromebook⢠x360 11 G4 Education Edition usb board replacement. HP prints this procedure on printed page 30 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
M47223-001- USB board. Source: printed page 31.
Preparation
Save your work, shut the computer down through the operating system, unplug AC power and every external device, and work on a grounded, static-safe surface.
Replacement
- Remove the bottom cover and disconnect the battery cable from the system board. (printed page 30).
- Snap both cables free of the ZIF connectors on the board. (printed page 30).
- Take out the middle Phillips M2.0 x 3.0 screw and the three Phillips M2.0 x 5.0 screws at the bracket. (printed page 30).
- Lift the back of the board up and pull the board toward you so the connectors clear the side of the computer. (printed page 30).
Part numbers in our catalog
- HP USB board M47223-001 (M47223-001)
- HP I/O board M47234-001 (M47234-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-chromebook-x360-11-g4-education-edition-usb-board-replacement-p30