Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP Elite 6 G2i 14 inch Chromebook Plus. Confirm the exact model on the service label before starting.
HP Elite 6 G2i 14 inch Chromebook Plus fan replacement. HP prints this procedure on printed page 32 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
P34059-001- 100W for TB4 G6 dock. Source: printed page 44.P34058-001- 180W/280W for TB4 G6 dock. Source: printed page 44.N96441-001- 15W. Source: printed page 44.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Get the machine ready for taking apart (the Preparation for disassembly section is on page 30). (printed page 32).
- Take the bottom cover off (the Bottom cover section is on page 30). (printed page 32).
- Detach the battery from the main board (the Battery section is on page 32). (printed page 40).
Part numbers in our catalog
- HP fan (UMA 15 W models) (N96441-001)
- HP fan P34059-001 (P34059-001)
- HP Fan, 180 W or 280 W for TB4 G6 dock P34058-001 (P34058-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elite-6-g2i-14-inch-chromebook-plus-fan-replacement-p32