Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP Elite 6 G2i 14 inch Chromebook Plus. Confirm the exact model on the service label before starting.
HP Elite 6 G2i 14 inch Chromebook Plus touchpad replacement. HP prints this procedure on printed page 47 of its maintenance and service guide, and the spare-part table for this part is on printed page 15.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
Q02287-001- Touchpad. Source: printed page 48.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Take the three Phillips M2.0 × 4.0 fasteners (1) that hold the bracket. (printed page 47).
- Take the bracket from the machine (2). (printed page 48).
- Fit the replacement part by working back through the printed removal steps (printed page 48).
Part numbers in our catalog
- HP Touchpad Q02287-001 (Q02287-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elite-6-g2i-14-inch-chromebook-plus-touchpad-replacement-p47